|
gettinafit
You can adjust the setting yourself more than likely. I don't have my fit yet but if its like most hydraulic systems its fairly easy to adjust.
look at the top of the clutch pedal where the master cylinder rod attaches to the pedal, there should be a codder pin through a rivet. if you pull the codder pin and rivet out and just "screw in" the part that attaches to the pedal it should set the engagement much lower.
It might sound lik a big task but if you have the slightest mechanical knowledge it should not be a problem just get down there and take a look.
This is what iknow from recenly doing my master cylinder replacement in my corolla.
|