Quote:
Originally Posted by raton
Maybe adding some RAAMat or Dynamat to the Beatrush Underpanel (side facing the engine) might help reduce some of the noise.  |
A very thin piece, just enough to dampen 'boominess' that might come off the underpanel would probably work very nicely.
Underhood temps should be lower or, at worst, the same. At rest the underpanel will have little or no effect, and in motion the louvers in the panel will cause additional air to be drawn through the engine compartment. In addition, aluminum is a fabulous conductor of heat so it will draw some heat out of the engine compartment that way as well.