Quote:
Originally Posted by vbwball
I am very frustrated. I purchased a 2009 Hood Protector from Zeta but I cannot get it to fit. Had several people also trying to help. On the second page of the tech data/installation sheet it has a picture of the Metal Bracket. It appears to be upside down in the picture. The longer part of it has the square hole and is meant for the top of the hood but the picture shows the longer part on the underside of the hood. Putting the longer part on the underside of the hood is also impossible because the hole would not line up with the hole on the underside of the hood. But once I figured that out the real stopping point is that the "bend" in the Metal Bracket is way too narrow to fit over the edge of my hood. The edge of my hood is considerably thicker than the width of the bend in the Metal Bracket. I certainly don't want to force the bracket on and damage my hood and I have no way of expanding the bend. You can't just pry the opening a little more open, you really need to make the bend at the base of the part wider too. Has anyone had this experience on their 2009 Sport? I obviously wanted to install this so it is sad to have to return it.
|
Bump
I'd like an answer too, before I buy one.