Speaker help....before my head comes off.

[Rod2Rice]

Originally Posted by mrwilli1

BTW,
Speaking of shops...
I've had multiple experiences over 35+ years with different shops in my area. I've come to the conclusion that it's best to do it yourself, continue to seek advice. The key is to be patient. Installing aftermarket speakers is not a difficult job. There may be shops that do wonderful installs, I have yet to experience one. Remember, no one cares more for your vehicle than you do. Just my 2 cents...

TOTALLY agree. You may find a shop to do it for you, but who's to say they arent gonna just hack the doors up themselves. Thyey may figure you brought it to them so you wont be pulling the door panels off to look at the work they did, so they will just do what they need to do to get them in.

[mrwilli1]

Not to mention any potential residual damage to door panels, paint, etc...

[Crawly]

Originally Posted by mrwilli1

I installed the Polk DB651S in the front and rear doors of my Fit. I simply removed the stock speakers and their hardware, installed half inch spacers at each location by drilling 4 holes in each door and mounted the speakers. No other modifications were needed. The clearance between the speakers and door panels was perfect. I don't see what all the fuss is about, just be sure you purchase the Polk slim version, DB651 (S).

Where did you get the 1/2 inch spacers? Something similar to these?
American International SG-650DX, Car Installation & Accessories, Speaker Installation, Speaker Spacers (Depth Extenders) - Sonic Electronix

[mrwilli1]

Those will work or purchase at your local install shop...

[radareclipse]

Mrwilli, welcome to the forum. Is that the new Honda Smart Car as your avatar? It's cute.

[mrwilli1]

I just squeezed my Fit a bit. With gas prices the way they are, I wouldn't be surprised to see this as the 2010 model.