Help to turn off ABS alarm

TAKUSITO · #1 (**permalink**) 10-11-2006, 02:58 PM

Hi:
Recentley I needed to change a front wheel bearing. We took the disc brake housing to do the change. After reassembling the wheel, the light of ABS turned on. I have tried disconnecting the battery for 15 minutes, checked lights and run the car for a few miles and the light still on. Do anyone have had this sort of problem?
Thanks and keep Fit-in

quangalang · #2 (**permalink**) 10-11-2006, 05:10 PM

ooooooh you damaged your ABS sensors. go back and check all the wiring to the sensors to see if they are cut or damaged

TAKUSITO · #3 (**permalink**) 10-11-2006, 05:43 PM

We just moved the sensar away from work area without disconnecting it. We will again the wires.

Is there any method to check the sensor. We just touched one.
Thanks,

quangalang · #4 (**permalink**) 10-11-2006, 06:17 PM

i dont know of anyway to check the sensor but may be a brake shop does or a dealer