Stuck rocker arm code p2646
#1
Stuck rocker arm code p2646
I got this code, went to a mechanic paid them 170 to do a diagnostic, they told me I needed a new spool valve solenoid. I made this repair. Was a $220 part. But the code is still on and my engine still bogs down when accelerating. This did not fix the problem at all. What can I do? The car is an 07 Honda Fit sport automatic
#2
I've been fighting this code for almost a year now. I ended up buying a new vtec solenoid and it fixed it for a bit. The thing is, my motor is VERY worn and eats oil. So the screen on the solenoid gets clogged pretty quick. So I have been having to clean the screen and change the oil quickly than usual (3,500 miles).
So if you have a new solenoid, here's what I would look at.
1) Oil is clean
2) Clear Code
3) Screen on solenoid is clean
So if you have a new solenoid, here's what I would look at.
1) Oil is clean
2) Clear Code
3) Screen on solenoid is clean
#4
I would check the wiring and the oil pressure switch from what I found searching.
If you wanted to test the solenoid itself, another member said this in an old thread; "Does solenoid click if you apply 4.5 volts to is terminals?"
If you wanted to test the solenoid itself, another member said this in an old thread; "Does solenoid click if you apply 4.5 volts to is terminals?"
Thread
Thread Starter
Forum
Replies
Last Post