1st Generation (GD 01-08) The one that started it all! Generation specific talk and questions here!

engine shakes on cold start up.

Thread Tools
 
Search this Thread
 
Old Mar 23, 2014 | 01:27 PM
  #1  
shivic's Avatar
Thread Starter
|
New Member
Joined: Feb 2014
Posts: 12
From: Provo, UT
engine shakes on cold start up.

when i first turn the car on. its shakes. when it warms up, its fine. does this sound normal or a mantenence issue arising?

thanks for your help
 
Old Mar 23, 2014 | 02:21 PM
  #2  
derykisonder's Avatar
Member
Joined: Aug 2013
Posts: 336
From: Los Angeles
5 Year Member
How long do you have to warm up the car?
Does your car die if you don't warm it up?
If it's around 5 to 10 minutes to warm up, then it's time for you to get your valves adjusted.
 
Old Mar 23, 2014 | 03:23 PM
  #3  
ikutoisahobo's Avatar
Member
Joined: Feb 2014
Posts: 722
From: Las Vegas
5 Year Member
I've always considered it normal. It goes away after like 2-3 minutes. Maybe less.
 
Old Mar 23, 2014 | 04:21 PM
  #4  
derykisonder's Avatar
Member
Joined: Aug 2013
Posts: 336
From: Los Angeles
5 Year Member
Well if you want the engine to run smoothly, then warm it up for a few minutes. But after you start the car it'll die and that's the valves
 
Old Mar 24, 2014 | 10:29 AM
  #5  
Edison Carasio's Avatar
Member
iTrader: (2)
Joined: Mar 2008
Posts: 745
From: St. Louis, Mo
5 Year Member
My car is doing this. I plan on having the valve lash done soon. Its worse in cold weather. But if I start it and immediately try to drive off and then come to a stop sign before the engine reaches normal operating temp, it'll die. I can kick it into neutral if I have to stop and it'll level out.
 
Old Mar 26, 2014 | 10:38 PM
  #6  
shivic's Avatar
Thread Starter
|
New Member
Joined: Feb 2014
Posts: 12
From: Provo, UT
thanks for the suggestions guys.

its only lasts for a couple minutes. never stalls. when it warms, it runs perfect.

none of my other cars have ever done this. they all rev higher until the iacv warms but they don't shake like chiwawaus
 
Old Mar 26, 2014 | 11:50 PM
  #7  
ikutoisahobo's Avatar
Member
Joined: Feb 2014
Posts: 722
From: Las Vegas
5 Year Member
Happens when you have a pint-sized 1.5L!
 
Old Mar 27, 2014 | 02:27 AM
  #8  
kylerwho's Avatar
spoon fed
iTrader: (11)
Joined: Apr 2008
Posts: 5,233
From: Seabattle, Washington
5 Year Member
How many miles are on the fit? Torn mounts will only increase the problem as the fit ages.
 
Old Mar 30, 2014 | 01:55 PM
  #9  
doctordoom's Avatar
Supervillain
iTrader: (7)
Joined: Sep 2006
Posts: 4,261
From: Los Angeles/Orange County
5 Year Member
Mine used to do that too, for like 30-50 seconds after a cold startup. I adjusted the valves and it would run smooth from the start.

You can wait for it to get bad enough that you do stall, or you can adjust it now and it'll run smooth from the start.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Moonshine
Fit DIY: Repair & Maintenance
14
Feb 15, 2014 11:59 PM
jackson6644
General Fit Talk
6
Oct 11, 2013 10:04 PM
hteejus
2nd Generation (GE 08-13)
10
Dec 8, 2012 10:03 PM
baris90
2nd Generation (GE 08-13)
15
Jun 12, 2009 08:49 PM
hqly
General Fit Talk
13
Nov 19, 2008 09:09 AM




All times are GMT -4. The time now is 06:59 AM.