Immobilizer issue
#1
Immobilizer issue
Hey guys, new member here. Just bought a fit with a what i thought was a bad alternator (ran&drove with battery light on until battery ran out). I bought the new alternator, but i decided to check the pgm fi relay 1 & 2 before I did the alternator.
I pulled both, and tested both. Both engaged and disengaged with no issues when hooked up to power. BUT, when I put them back in, I now have an immobilizer issue (flashing key light, cranks but no start, shifter won't engage).
anyone know what multimeter readings I should get from the pgm fi relay 1 & 2 (blue and red #13 / #14 under driver dash fuse panel)?
also, I realized that my power source to test the relays was 18v not 12v. The relays still click when powered, but I can't think of any other reason why the immobilizer system would suddenly stop working.
thanks in advance for any help.
I pulled both, and tested both. Both engaged and disengaged with no issues when hooked up to power. BUT, when I put them back in, I now have an immobilizer issue (flashing key light, cranks but no start, shifter won't engage).
anyone know what multimeter readings I should get from the pgm fi relay 1 & 2 (blue and red #13 / #14 under driver dash fuse panel)?
also, I realized that my power source to test the relays was 18v not 12v. The relays still click when powered, but I can't think of any other reason why the immobilizer system would suddenly stop working.
thanks in advance for any help.
Thread
Thread Starter
Forum
Replies
Last Post
lister
1st Generation (GD 01-08)
17
03-08-2020 12:58 PM
budro
2nd Generation (GE 08-13)
1
07-25-2015 11:38 AM