Lifting my fit

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2018 | 07:30 AM

Steveo7

Thread Starter

New Member

Joined: Apr 2018

Posts: 7

From: New Jersey

Lifting my fit

Hello everyone. This is my first post on here. I’m sorry if this is a dumb question. I did try searching however I am not the most tech savvy person.

I am looking to lift my fit some. I found some cool spacers for the rear but what can I do in the front? Does anyone kno if different springs will work? Say lowering springs for a crv or stock accord/ civic springs

Jul 25, 2018 | 12:36 PM

DaGou

Member

Joined: Jun 2009

Posts: 24

From: VA

Are you converting to 4X4 as well? Just trying to figure why you want to lift a Fit. You want a higher center of gravity so it handles like crap?

Jul 25, 2018 | 12:46 PM

Steveo7

Thread Starter

New Member

Joined: Apr 2018

Posts: 7

From: New Jersey

Looking to put a certain set of rims and tires on it. Need to go up about 2”

Jul 25, 2018 | 04:06 PM

knope

Member

Joined: Nov 2017

Posts: 662

From: DC, USA

lmao

Last edited by knope; Jul 25, 2018 at 04:10 PM. Reason: this version is fine.

Jul 25, 2018 | 04:07 PM

GolNat

Member

iTrader: (1)

Joined: Jun 2015

Posts: 1,383

From: Delaware

You can get custom springs made from Swift or Ground Control but your shock is only so long.

A set of coil overs might be able to go higher then stock but I don't think so as most have them have shortened springs and shock bodies. Maybe you can email someone about it.

BC Racing
K Sport
Tein

Jul 25, 2018 | 05:55 PM

Steveo7

Thread Starter

New Member

Joined: Apr 2018

Posts: 7

From: New Jersey

Thank u for the response. I will look into the customer springs. I didn’t think coil overs would do it either. Would make the ride stiffer but not sure about higher

Jul 25, 2018 | 06:14 PM

knope

Member

Joined: Nov 2017

Posts: 662

From: DC, USA

are you looking to enter a donk competition?

this thread may help

Last edited by knope; Jul 25, 2018 at 06:17 PM. Reason: thread update

Jul 25, 2018 | 10:35 PM

DaGou

Member

Joined: Jun 2009

Posts: 24

From: VA

Be the first Fit to run 24s.

Jul 26, 2018 | 06:28 AM

Steveo7

Thread Starter

New Member

Joined: Apr 2018

Posts: 7

From: New Jersey

Lol at the donk competition. There 16’s with a 205 55 16 tire with a 25 offset. They rub just a little in the rear. That’s what I want to go up about 1.5-2”

Last edited by Steveo7; Jul 26, 2018 at 06:38 AM.

Jul 26, 2018 | 07:20 AM

#10

knope

Member

Joined: Nov 2017

Posts: 662

From: DC, USA

What about a lower profile tire? Or stretching a thinner tire if the rub is in the corners?

edit: how/where is it rubbing? Can you snap a pick or 2?

Jul 26, 2018 | 08:12 AM

#11

Steveo7

Thread Starter

New Member

Joined: Apr 2018

Posts: 7

From: New Jersey

My wife surprised me with the rims and tires and of course they are non returnable. The rub the outer quarter. I’m sure I can just have the fenders rolled. However this is my everyday daily driver just don’t want to go crazy modifying it.