08 Manual Transmission Fluid change
#2
08-20-2018, 08:03 AM
Its #9, the other bolt with a 3/8" square hole (besides the drain bolt #10)..
Full image and parts callout:
https://www.hondapartscheap.com/auto...sion-case-scat
#3
08-20-2018, 10:06 AM
Its #9, the other bolt with a 3/8" square hole (besides the drain bolt #10)..
Full image and parts callout:
https://www.hondapartscheap.com/auto...sion-case-scat
GQCPA
#4
08-20-2018, 10:31 AM
Buff, with all due respect for your greater wisdom and knowledge, are you sure it isn't #14 on that diagram?
#5
08-20-2018, 10:49 AM
I'll add just in case the OP isn't a regular at transmission fluid changes...
Remove the fill plug before removing the drain just to make sure it comes out OK. Don't want to drain and then not be able to fill.
Remove the fill plug before removing the drain just to make sure it comes out OK. Don't want to drain and then not be able to fill.
#6
08-20-2018, 01:16 PM
Look for the aluminum crush washer under the fill bolt (both fill & drain bolts have a crush washer). If its a regular steel washer, that ain't the bolt to touch. The descriptions in the full link are not helpful...
(I never had difficulty finding either.)
Last edited by Carbuff2; 08-20-2018 at 01:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
sultanofslide
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
4
01-14-2021 11:33 PM
dvoisawesome
3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum
10
12-12-2017 02:43 PM
mole177
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
6
02-25-2011 02:51 PM