Need some help ASAP
#1
Need some help ASAP
Just received my axis styling taillights and installed them no problem, but when I went to plug all the connections back in, the one set does not work. The reverse is fine, and the large connector is fine, but the medium sized one on the axis taillight has a completely different connector. It's just a black and red wire with a weird connection. Any ideas how this hooks up to the factory connector?
#5
I did order mine through japanparts.com though, so maybe that's were the problem is. I am really debating splicing, but I do want to screw something up with the factory wiring if does not work. It is a black wire and red wire on the axis tails and a black wire and white wire on our stock tails. What do you think?
#7
The usdm socket unplugs from the wire harness and u replace it with the one it came with. I dont remember if it was the brake or reverse light. Two of those usdm plugs should plug right in.
Thread
Thread Starter
Forum
Replies
Last Post
Xitomatl
2nd Generation GE8 Specific Fit I.C.E. Sub-Forum
10
08-20-2019 01:46 PM
Vash
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
6
12-15-2011 03:50 AM