Civic Steering Wheel in a GE8?
Civic Steering Wheel in a GE8?
One of the things I miss most about my S2000 was the glorious steering wheel. Unfortunately, the wheel in the base Fit just doesn't have the same level of feel. So I've been looking at upgrade options and figured the 8th gen Civic would be the most likely candidate for a direct swap.
I was able to find a bunch of pics of the civic and fit steering wheel/airbag set-up, and it looks like the wheel should work but the airbags are different. Does anyone have any experience with this? Searching hasn't turned up any definitive answers.
I was able to find a bunch of pics of the civic and fit steering wheel/airbag set-up, and it looks like the wheel should work but the airbags are different. Does anyone have any experience with this? Searching hasn't turned up any definitive answers.
On a side not your car insurance will be invalid unless you tell them what you have done. Even then most of them will not go for it. I would check around first since it's pretty much illegal to tamper with an airbag in all of North America. Just speaking from experience!
Swapping it to another nearly-identical OEM wheel is not tampering anything especially when it is all OEM Honda and is plug-and-play.
I have a Civic wheel being wrapped in Alcantara. Same size, but has thumb rests. Same internals too.

Doing a pair of Civic seats soon too, also which plug right in to the airbag plugs.

Doing a pair of Civic seats soon too, also which plug right in to the airbag plugs.
Last edited by BlueBoogers; Dec 17, 2012 at 05:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Fitftw15
3rd Gen GK Specific Fit Interior Modifications Sub-Forum
1
Feb 19, 2019 06:14 PM
counterFIT
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
2
Dec 3, 2015 09:46 PM
Tugboat6
3rd Gen GK Specific Fit Interior Modifications Sub-Forum
4
Oct 27, 2015 08:41 AM
Jon H
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
1
Sep 26, 2014 10:39 AM





