On my 2010 Honda fit standard transmission after hard acceleration my AC did not come back on. I know it shuts down under hard acceleration Any ideas what would cause it not to come back on like a low or high pressure switch? The condenser fan comes on but the AC clutch will not engage any help would be appreciated thanks

 

Lots of AC failure threads this week.

 

Had mine die in the same manner a few weeks back. Ended up blowing the relay in control of the compressor. I originally thought it was compressor and took it in for a diagnosis and ended up getting my relay replaced. I have no idea what or where this relay is, the mechanic didnt seem interested in telling me. I'll try to do some digging and locate it. In another thread a guy mentioned the relay was underneath the battery box but again, I don't know which one.

 

Thanks If you find out where it is let me know

 

 

Ayy thanks for doing the hard work my dude! I get cross-eyed looking at my service manual some days.

 

This video also shows the location:

 

I'm having a.c. problems with mine & wondering if its a relay or maybe the compressor clutch. Once the rpms get above about 3000 it will cut off.

 

speaking of cooling, has anyone upgraded cooling fans for bette(colder) AC?

 

I've thought about it but not quite convinced it'll work any better.

 

that's what i am worried abt.. unelss i change fan size, i dun think its ganna make a big difference =P

 

Where is the ac low pressure switch location on 2013 fit . Can’t find information anywhere on line