Does anyone have instructions on how to remove the rear door panel? I have a rattling issue that I wana fix.

UPDATE:
Ok well I took the rear door panels off today and took some pictures for future reference.

First off there are 3 tabs that you wana push in on the door handle and then pull off the bottom part plastic part. This will reveal 1 of the 2 screws that need to be removed.


The 2nd screw is on the door opener.


Then all you need to do is remove the 6 clips at these locations by pulling at the panel.


After the clips are loose, unlpug the window switch and slide the door opener through the panel. Then just lift the panel up and there you go.

 

I don't know the answer, but I just removed my driver's armrest on the door to solve a minor rattle. I wanted to remove the rest of the door panel so I can have better access, but I was afraid to break clips or something.

But it would be good to know how to remove panels. If someone knows it would be appreciated.

 

What was causing your rattle?

 

Removed the panel today and took some pics.

 

Got any pointers on removing front door panel? I am planning to install some new speakers.

 

Sorry no pics for the front. I removed the back panel to fix a rattle that I was having. If I do remove the fronts I will post pics.