factory intermittent wiper switch?
Subscribing for interest as well.
FYI, on my 2002 USA CR-V, I put an RSX intermittent switch and it works flawlessly. It involved removing the old stalk, putting the new RSX stalk (plug and play), and then the additional step of wiring a single (or was it two?) wire from the stalk to one of the pins on the harness (somewhere farther below the steering wheel). It was a 20 min job , quite easy. It does everything you'd expect, including the typical 'single wipe' when you let go of the brakes at a full stop etc...
I want this on our 09 Fit!
EDIT: This PDF should be of great help in uncovering a mod for the Fit: http://www.magic-eight-ball.com/rsx_wiper.pdf
FYI, on my 2002 USA CR-V, I put an RSX intermittent switch and it works flawlessly. It involved removing the old stalk, putting the new RSX stalk (plug and play), and then the additional step of wiring a single (or was it two?) wire from the stalk to one of the pins on the harness (somewhere farther below the steering wheel). It was a 20 min job , quite easy. It does everything you'd expect, including the typical 'single wipe' when you let go of the brakes at a full stop etc...
I want this on our 09 Fit!
EDIT: This PDF should be of great help in uncovering a mod for the Fit: http://www.magic-eight-ball.com/rsx_wiper.pdf
Last edited by justintime; Jun 3, 2009 at 02:48 PM.
Member
Joined: Oct 2008
Posts: 220
From: Georgia
Looks like mscott has pulled this mod off! Give the guy some +rep!
https://www.fitfreak.net/forums/2nd-...-non-navi.html
https://www.fitfreak.net/forums/2nd-...-non-navi.html
Thread
Thread Starter
Forum
Replies
Last Post
Santiad
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
9
Jan 11, 2015 11:42 PM
wingmanz
2nd Generation (GE 08-13)
11
Oct 10, 2010 05:32 PM
