"Best" ride height, bilstein PSSs
#1
"Best" ride height, bilstein PSSs
Installed the Bilstein PSSs over the weekend on the 2010 Fit I just got, and I wound up adjusting them quite a bit to get them on the car easier. I failed to take a ride height measurement before I installed them, so now I have no idea what the baseline should be.
I'm setting the car up as a daily driver with some HPDE/autocross action mixed in, so I want to find the right point where the control arms are level, then worry about fine tuning. Eyeballing the control arms they look level, but the car still looks like it's riding a higher than stock.
Can someone tell me where the best performing ride height is, roughly, on these coilovers? Or just give me a measure from the wheel center to the fender lip is on a stock car, front and rear? Imprecise as that is, it'd be a start.
Thanks!
I'm setting the car up as a daily driver with some HPDE/autocross action mixed in, so I want to find the right point where the control arms are level, then worry about fine tuning. Eyeballing the control arms they look level, but the car still looks like it's riding a higher than stock.
Can someone tell me where the best performing ride height is, roughly, on these coilovers? Or just give me a measure from the wheel center to the fender lip is on a stock car, front and rear? Imprecise as that is, it'd be a start.
Thanks!
Last edited by paanta; 07-08-2014 at 03:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
devmail
Fit Suspension & Brake Modifications
3
04-24-2015 01:16 PM
JackBurton
Fit Suspension & Brake Modifications
10
03-26-2008 02:16 PM