Loose spark plug. Any tried and true remedy?

Reply Subscribe

Thread Tools

Search this Thread

Dec 6, 2019 | 12:57 PM

#41

StrobeWylan

New Member

Joined: Sep 2011

Posts: 17

From: Montana

I think if it comes to me using a Time Sert I'll opt for using the grease. Any thoughts as to Time Sert verses Heli Coil. I've watched some YouTubes and sounds like a lot of conflicting opinions.

Dec 9, 2019 | 06:36 AM

#42

spike55_bmw

Member

Joined: Mar 2011

Posts: 783

From: Harrisburg, PA

I've used the Heli-Coils on motorcycle foot peg bolt holes and watched the TimeSet vid. In my case, the Heli-Coil is depended on 'red' Loctite, whereas, the TimeSet 'expands' in the pilot hole to become secure. I like the idea of a TimeSet 'with' red Loctite.

Jan 22, 2025 | 11:45 PM

#43

skidsteer226

New Member

Joined: Jan 2025

Posts: 11

From: Manitoba, Canada

Quote:

Originally Posted by Totman

I just got off the phone with my local Honda dealer and they advised me to torque the spark plugs to 20ft lbs. I must admit, I was shocked but the gentleman ensured me that 20ft lbs was correct. Everywhere I read online stated 13ft lbs. as the recommended torque for plugs in our Fits. Can anyone else confirm this?

They told me the same at the dealer as well. That was the new spec in the updated service manual.

Jan 22, 2025 | 11:47 PM

#44

skidsteer226

New Member

Joined: Jan 2025

Posts: 11

From: Manitoba, Canada

Quote:

Originally Posted by fujisawa

If the threads are damaged that may make them worse. At least, I would think so given how softer materials like plastic work. 25lb ft is probably not too much imo but I would also be cautious in this situation. I’m also not sure what better plan to suggest.

20 ft/#s as per the dealer in the updated service manual.