Easiest headlight replacement method
#1
Easiest headlight replacement method
Hi everyone, looking for the easiest method to replacing the headlight bulbs on my 2009 LX. Up to now it's looking like I'm taking the fender off, etc which is a lot. New fit owner, really digging it. Any advice appreciated and my apologies if his topic has been addressed elsewhere, wasn't able to find it. Happy fitting...
#3
Welcome to the forum. Our 2nd gen Fits are fairly easy to replace the bulbs. Just need to be careful not to touch the glass on the bulb with your bare fingers. (oil on your fingers could cause shortened bulb life). Not so easy is bulb replacement on the first gen Fits. You need to squeeze your hand between the fender liner and around the front wheel. To make things worse, you can't see what you are doing so you have to work by feel. I've changed bulbs on both generations and the first gens really are a challenge for me.
Last edited by Rampo; 08-13-2015 at 12:11 PM. Reason: spelling
Thread
Thread Starter
Forum
Replies
Last Post
TheRealBenzo
2nd Generation (GE 08-13)
7
07-06-2019 11:53 AM
fitbuddha
2nd Generation GE8 Specific DIY: Repair & Maintenance Sub-Forum
3
11-24-2014 06:16 AM
crushbent
Fit Interior & Exterior Illumination
7
04-20-2008 06:08 PM
anothermark
Other Car Related Discussions
1
06-22-2005 01:43 PM