FS: Wiper Stalk - Variable Intermittent GE8
#1
Wiper Stalk - Variable Intermittent GE8
PART # 35256-SWA-A11
Used, Overall great condition, has a couple of really minor scuffs on end of stalk. Bought this to add to my Fit, but never attempted because I learned it wouldnt work on my model. Read below...
$20 SHIPPED ANYWHERE CONTINENTAL U.S ONLY
PAYPAL Only
Wiper Stalk for modifying a GE8's Front wiper function to have Variable Intermittent capabilities. Please understand how to do this before purchasing.
From what i gathered after reading the whole thread was this mod will work on any GE8 except for sport automatics with paddle shifters.
Which means this should work on GE8s with:
- manual transmissions
- base automatics transmission
Again, it is NOT my responsibility for fitment, do your research (unlike i did, lol).
Read through the whole thread here: https://www.fitfreak.net/forums/2nd-...tml#post722453
Install:
Long story short, ensure your car has the pin needed and you are ready to run a wire from the stalk to the harness behind the fuse panel.
You can either use pins (2 different sizes, i dont know what works, nobody could find a part number on the DIY thread and used junkyard harness pins/metra radio pins)
or
Some users were stripping the wire and simply shoving it in the plug and hot gluing it.
Diagram of panel which is directly behind the fuse panel, indicating the green plug's location
photo credit mscott
photo of my car (2009 Fit Sport Automatic), where pin is missing. If you have no pin here, and only a hole like i do...you can not do this mod! Get a mirror or take some pics to confirm.
Used, Overall great condition, has a couple of really minor scuffs on end of stalk. Bought this to add to my Fit, but never attempted because I learned it wouldnt work on my model. Read below...
$20 SHIPPED ANYWHERE CONTINENTAL U.S ONLY
PAYPAL Only
Wiper Stalk for modifying a GE8's Front wiper function to have Variable Intermittent capabilities. Please understand how to do this before purchasing.
From what i gathered after reading the whole thread was this mod will work on any GE8 except for sport automatics with paddle shifters.
Which means this should work on GE8s with:
- manual transmissions
- base automatics transmission
Again, it is NOT my responsibility for fitment, do your research (unlike i did, lol).
Read through the whole thread here: https://www.fitfreak.net/forums/2nd-...tml#post722453
Install:
Long story short, ensure your car has the pin needed and you are ready to run a wire from the stalk to the harness behind the fuse panel.
You can either use pins (2 different sizes, i dont know what works, nobody could find a part number on the DIY thread and used junkyard harness pins/metra radio pins)
or
Some users were stripping the wire and simply shoving it in the plug and hot gluing it.
Diagram of panel which is directly behind the fuse panel, indicating the green plug's location
photo credit mscott
photo of my car (2009 Fit Sport Automatic), where pin is missing. If you have no pin here, and only a hole like i do...you can not do this mod! Get a mirror or take some pics to confirm.
Last edited by eulogy; 07-03-2019 at 10:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post