Do these two together allow for factory alignment?

How far out of whack do just springs make the alignment?

 

my camber moved but stayed in spec. my right toe moved .5degrees but even then stayed in spec.

i don't think you'll need an alignment but if its worth the peace of mind...

 

I'm lowered on Tanabe DF210's and my front negative camber is all out of whack, will camber bolts correct that for me?

 

are you lowered on eibach sportlines???

 

Yes, the camber bolts will allow you to align back to factory specs with the Eibach Sportlines. Just make sure you get the toe alignment adjusted as well.

 

yes i am..

 

i'm on sportlines but i didn't need to use the camber bolts. so i have 2 sets (accidentally ordered 2) that i didnt use. la;ghaklejtha

 

I wouldnt recommend the eibach camber bolts. We lowered our car today, and I installed the eibachs when I put it all back together. The nut was out of round on the end, and was a bear to thread on all the way. I think they need to do a better job making the nuts