I've searched for a guide on where the dome light wiring is on the 2020 Fit (I have an ex-l) but I've had no luck. I was about to buy the service manual subscription day pass from an independent repair site, but I figured before I did I should probably ask the community to see if anyone with a 2020 model could illustrate or teach me where this dang wiring is. My goal is to splice my footwell LEDs in so they operate in tandem with the dome light.

I've found a bunch of guides on youtube, but they are all for earlier models that don't have the same wiring harness OR the same panel cover that the 2020 has, so it's hard to poke around in there blindly with a test bulb without the worry of potentially breaking clips.

Any and all help is greatly appreciated, even if it's just a link to a service manual that you know has details on where the wiring to the dome light is, or at the very least how to get this panel off to access the full wiring harness so I can futz around.

Many thanks!

 

A follow up to this thread - I've found a wiring schematic that included the ceiling and map lights. I'll report back my findings on the physical plug locations in the wiring harness!