Unofficial Honda FIT Forums - Spoon Sports USA 2015 Fit SEMA Build

Unofficial Honda FIT Forums (https://www.fitfreak.net/forums/)

- 3rd Generation (2015+) (https://www.fitfreak.net/forums/3rd-generation-2015/)

- - Spoon Sports USA 2015 Fit SEMA Build (https://www.fitfreak.net/forums/3rd-generation-2015/84452-spoon-sports-usa-2015-fit-sema-build.html)

Great pics. Thanks for posting!

Any info on those side mirrors?

Quote:

Originally Posted by robertsmithfromthecure (Post 1310180)

Great pics. Thanks for posting!

Any info on those side mirrors?

The production versions are not available yet.

Does the Spoon N1 stick out far with the JDM rear bumper?

Quote:

Originally Posted by .RYAN (Post 1312843)

Does the Spoon N1 stick out far with the JDM rear bumper?

No, it does not.

Attachment 10965

I love this little car, you guys at spoon sports are doing a fantastic job here!!!

Quote:

Originally Posted by Bad/Andy/gk (Post 1312904)

I love this little car, you guys at spoon sports are doing a fantastic job here!!!

Thank you!

How many inch is the b pipe and rear exhaust?

Quote:

Originally Posted by Kurse (Post 1313711)

How many inch is the b pipe and rear exhaust?

B-Pipe is 45mm (1.77"), exhaust is 50mm (1.97"), tip is 65mm (2.55")

What's the drop amount, fenders rolled/pulled, camber needed for the wheels?

Any ecu tunes or plans?

Changing the bumpers to Spoon?

I wish you guys could make a RS wing mounting template for the GK guys on here.

Quote:

Originally Posted by .RYAN (Post 1313873)

What's the drop amount, fenders rolled/pulled, camber needed for the wheels?

Any ecu tunes or plans?

Changing the bumpers to Spoon?

Not sure what the drop amount is but it's the lowest we can go on our prototype coilovers. Both fenders rolled and pulled. The front has 4 degrees of camber and the rear has about 2degrees using the adjusting plates.

No plans for ECU tune because the direct injection makes it very difficult to manage.

No Spoon bumpers are available at this time, it's possible for the future.

Quote:

Originally Posted by JAY986 (Post 1317765)

I wish you guys could make a RS wing mounting template for the GK guys on here.

There's no template necessary, it uses the factory mounting holes.

Car looks amazing! Where can I find info about the rear wiper delete kit that you used?

Quote:

Originally Posted by TheHate (Post 1394324)

Car looks amazing! Where can I find info about the rear wiper delete kit that you used?

Here you go
https://www.fitfreak.net/forums/3rd-...ml#post1378538

Quote:

Originally Posted by nisco (Post 1378538)

Recently deleted the rear wiper assembly. I hated the fact that dust collects on the wiper and feared the rear window being scratched. Instead of doing the vertical wiper mod, I went ahead and removed the wiper assembly all together. Still need to find a better rubber plug for the hole in the tailgate it self but used an OEM part from the base model GK in Japan to cover the hole for the rear trim piece.

The part used was 74895-T5A-Z01 and can be ordered through the link below. It costed me about $11 shipped and two weeks.
https://www.amayama.com/en/part/honda/74895t5az01

https://preview.ibb.co/cv6oSF/IMG_20170815_184002.jpg

https://preview.ibb.co/hnqREv/IMG_20170815_184024.jpg

https://preview.ibb.co/jouKZv/IMG_20170815_184020.jpg

https://preview.ibb.co/ckuE1a/IMG_20170815_184127.jpg

Also wrapped the upper portion of taillights in carbon fiber vinyl, added OEM red Honda badge and 2012 Fit Sport wheels off my wife's car since we are selling it to make way for a CR-V.

https://preview.ibb.co/dCBoSF/IMG_20170816_135736.jpg

https://preview.ibb.co/mLkySF/IMG_20170816_135728.jpg

Quote:

Originally Posted by nisco (Post 1394456)

Here you go
https://www.fitfreak.net/forums/3rd-...ml#post1378538

Thanks for sharing! :bowdown:

Quote:

Originally Posted by nisco (Post 1394456)

Here you go
https://www.fitfreak.net/forums/3rd-...ml#post1378538

Thank you so much!

This is so cool.. thanks!