Just the tip
Added a $15 exhaust tip from Autozone (PM-582AZ) to further my poserness.
https://cimg3.ibsrv.net/gimg/www.fit...49efd8a0b.jpeg |
Going up to Ebtec Auto up in Sandy Springs, Ga to tune the ktuner on the F-it next week. Really excited to see what we can do with it.
|
I have installed a ST suspension coilover kit and the Sparco Asetto Gara rims in 7x17 ET 42 and 205/40 tires. Greetings from Germany.
https://abload.de/img/img_20190705_1429300sjhs.jpg https://abload.de/img/img_20190705_142946pgkjw.jpg https://abload.de/img/img_20190705_143000x4k5h.jpg |
Got the plates, time for a bracket!
Back in AZ front plates were never required but out in TX it is so this is what I did today (nothing special).
I had to modify a bracket I got on line, used an aluminum flat stock and 2” screws so I don’t loose it. I should’ve painted the aluminum black, oh well. https://cimg7.ibsrv.net/gimg/www.fit...ee754ba32.jpeg https://cimg4.ibsrv.net/gimg/www.fit...64ea9ce23.jpeg https://cimg3.ibsrv.net/gimg/www.fit...d14e7ff69.jpeg |
Oil catch can
https://cimg6.ibsrv.net/gimg/www.fit...1217689b02.jpg
Finally got a chance to install my Amazon oil catch can! I probably shouldn't have cheaped out so much, I ended having to buy a bunch of fittings to connect the tubing from 5/16ths to 3/8 in id. 2015 EX CVT, 40k miles |
Originally Posted by Bornslacker
(Post 1432021)
https://cimg6.ibsrv.net/gimg/www.fit...1217689b02.jpg
Finally got a chance to install my Amazon oil catch can! I probably shouldn't have cheaped out so much, I ended having to buy a bunch of fittings to connect the tubing from 5/16ths to 3/8 in id. 2015 EX CVT, 40k miles https://smile.amazon.com/s?k=oil+cat...f=nb_sb_noss_1 |
Originally Posted by SilverEX15
(Post 1432052)
Looks good! Which one did you get?
https://smile.amazon.com/s?k=oil+cat...f=nb_sb_noss_1 |
Originally Posted by Bornslacker
(Post 1432068)
I got the Evil Energy one. The build quality is fine for the most part, not great, but gets the job done. The main structural parts and body feel solid. The filter is just two walls of plastic with holes punched. It screws in and out and actually came out when I checked it after ~400 miles. The fittings fit snugly, however there's a psuedo-washer on the dipstick that already came out of place and got squished into the threading. Not sure how that even happened!
|
Originally Posted by SilverEX15
(Post 1432074)
How do you drain it? Getting below it looks like it would be difficult.
I used to have mine there owner will need to cover alternator with a rag, to prevent oil dripping downward from there, can either un bolt, or simply spin the bottom half of the catch can off, to service it. |
What size is the PCV tubing? 5/16?
Just wanted to make sure I get the correct fittings for my catch can 😅 |
Originally Posted by LulzKev
(Post 1432106)
What size is the PCV tubing? 5/16?
Just wanted to make sure I get the correct fittings for my catch can 😅 |
There is a inside AND outside diameter to consider for the hoses. I ended up using this: HBD Thermoid NBR/PVC SAE30R7 Premium Fuel Line Hose, 3/8" X 25' Length, 0.375" ID, Black
I also had to upgrade to larger and stronger clamps. |
Fortin EVO-ONE Remote Start
Just finished installing Fortin EVO-ONE with the THAR-ONE-HON4 harness. I was on a roll once I got started so no pics. Once all the pre-work for the harness was cleaned up and done prior to install, it took about 20 minutes to do. Now I can remote start during the summer months in Texas.
|
Side Skirts
|
That skirt looks really good as well with the vtec sticker
|
Nice car man!!! The backlights really looks great with the colour of the car
|
Weight reduction at it's finest haha!!! Great job man!
|
Originally Posted by FrozoneTheFit
(Post 1417501)
https://cimg3.ibsrv.net/gimg/www.fit...044c68abc5.jpgInstalled JDM red Honda emblems😁😁😁 [From ICB Motorsport]
https://cimg6.ibsrv.net/gimg/www.fit...aa40710623.jpg https://cimg1.ibsrv.net/gimg/www.fit...60338f65d6.jpgThese genuine honda ones just have a shine and feel that ebay or knockoffs can't replicate. https://cimg2.ibsrv.net/gimg/www.fit...6de044f9ee.jpg |
Originally Posted by Alvin Thai
(Post 1424478)
Some work I've done this past month
The wheel are for sale for local pickup also in Orange County, CA $450 w/tires OBO just DM me. They are Beyen Mesh 15x7 +28 with TSW Center Caps https://cimg4.ibsrv.net/gimg/www.fit...872a9ce245.jpg Amazon Nicol Sound Deadining Material https://cimg3.ibsrv.net/gimg/www.fit...a87433d6f0.jpg Wheel Well undercoating https://cimg2.ibsrv.net/gimg/www.fit...8ce1a986cf.jpg Undercoating for the Rear End and Megan Sway Bar https://cimg8.ibsrv.net/gimg/www.fit...8f520ee4a1.jpg Megan Coilovers https://cimg5.ibsrv.net/gimg/www.fit...f99a90a4f9.jpg Drop https://cimg4.ibsrv.net/gimg/www.fit...7e619626dd.jpg Aliexpress matts actually fit AMAZING https://cimg5.ibsrv.net/gimg/www.fit...5bc89377cc.jpg https://cimg6.ibsrv.net/gimg/www.fit...7a31be01e2.jpg |
Originally Posted by NatoRed
(Post 1428288)
finally decided to upgrade and get me a new 2019 GK5 Jazz
Good timing on the delivery I had my ruckus pinched sunday morning and my gen9 civic just isn't fun anymore. A good friend runs the dealership its from, as a result im getting a bunch of stuff thrown at it at the moment My goal is handling mostly we have some awesome windy roads through some remote parts of the countryside where handling is key and we have a few tracks for "play days" The Kiwi RS Sport has a mugen body kit fitted from factory mugen 17x7 wheels fitted with Potenza RE003 Mugen Sport coilover suspension pack (on a plane from japan)-20mm there will be a tune some and there will be plenty more to come exhaust will be coming it takes forever to get things down her so i might just make one https://cimg2.ibsrv.net/gimg/www.fit...6d8914b18.jpeg Delivery Day |
All times are GMT -4. The time now is 01:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands