|
Originally Posted by evilchargerfan
(Post 1439726)
|
Originally Posted by SilverEX15
(Post 1439728)
Be sure to use enough soap! : )
Facebook Post https://cimg1.ibsrv.net/gimg/www.fit...2e98c31d72.png |
yup got one of those. what soap you using?
|
https://cimg4.ibsrv.net/gimg/www.fit...e992f0b8b8.jpg NOTE: I bought the 5 gal jug from walmart for less than $22. I think it was a glitch / price error. |
Well, I have had my 2019 Sport CVT about a week and a half now and have done these few things
Kuga 3D floor mats SuperBright LEDs headlight bulbs Pilot Sport mini antenna Weathertech front window reflectors. To do: Have to install my HFP rear spoiler, yellow foglight film, iJDMTOYS rear pillar leds, catch can and waiting for my Bisimoto pulse chamber to show up as that is my priority! I need a little noise as it kills me to drive a quiet car! Also trying figure out if I want a Takeda intake or something else. This is fun :thumbups: |
Nice
Built what you want and be happy
|
Threw my led fogs on 😭😭😭 also threw my headlights and reverse lights on recently!
https://cimg4.ibsrv.net/gimg/www.fit...7b5abd4e5.jpeg |
Originally Posted by Ummitsgabe
(Post 1439980)
Threw my led fogs on 😭😭😭 also threw my headlights and reverse lights on recently!
https://cimg4.ibsrv.net/gimg/www.fit...7b5abd4e5.jpeg |
Originally Posted by Elcid43
(Post 1439981)
Wow, looks good :nod: Can I ask how you got your fogs out? I need to pull mine so I can tin the lenses yellow. Thanks
|
Fog
The fog cover pops out the cover is just clip on the bumper and then remove 2 screws and the fog light housing comes out and then unclip the light harness
|
Thanks guys, will give it a go. I tried to pop it out the other day with a butter knife wrapped it tape but was nervous about breaking something on a car with 300 miles on it. I will be a little more confident this time. Hopefully the first snow of the season dissappears quickly :(
|
This is the passenger side, which in the GK's at least a bit more tedious since there is WAY LESS space to tinker with....
As soon as i recieve the fog lamp covers and do the drivers side, ill do another slide show...🤪😬 https://cimg7.ibsrv.net/gimg/www.fit...89721cc6a8.jpg Spectre 90⁰ bend and flexible intake tube https://cimg2.ibsrv.net/gimg/www.fit...35d85145a2.jpg Spectre 90⁰ bend https://cimg8.ibsrv.net/gimg/www.fit...2fe6471d53.jpg Drank a beer in the process 😬 https://cimg0.ibsrv.net/gimg/www.fit...481756c35f.jpg Used a 2¾ or 2⅞ hole saw... cant really recall the size https://cimg4.ibsrv.net/gimg/www.fit...048251dafe.jpg Testing the 90⁰ bend on hole i made https://cimg7.ibsrv.net/gimg/www.fit...74e415db26.jpg The shinny dot is the 90⁰ bend viewed from the front bumper as I fit tested https://cimg2.ibsrv.net/gimg/www.fit...34c80017e0.jpg Routed the Spectre flexible "intake" duct along the underside plastic cover, will hold them in place with some mighty heavy duty cable tie wraps https://cimg7.ibsrv.net/gimg/www.fit...c02f54f035.jpg Almost, almost finished, as soon as the fog lamp covers arrive.... https://cimg3.ibsrv.net/gimg/www.fit...a85c1c805a.jpg Fog lamp / \"brake duct cooling intakes" arrived! https://cimg7.ibsrv.net/gimg/www.fit...71f686ac78.jpg Inside look.... those are the connecting rubbers from the flexible intake... https://cimg6.ibsrv.net/gimg/www.fit...df8584a1d5.jpg How it looks once installed... in this pic i haven't installed the flexible part... https://cimg3.ibsrv.net/gimg/www.fit...17b93ef338.jpg That's how it looks now.... |
No useful pictures, but changed the starter today. Once I figured out how to reach the top bolt, ended up being a relatively easy job. Had to remove four sensor wires at the top of the harness in front of the engine, but didn't have to remove the coolant tank or oil filter to get the starter out once the bolts were removed.
|
Originally Posted by Elcid43
(Post 1439990)
I tried to pop it out the other day with a butter knife wrapped it tape...
|
Originally Posted by SilverEX15
(Post 1440051)
Do yourself a favor and get a set of those plastic removal tools. They're great.
|
Originally Posted by elkaku
(Post 1439997)
Routed the Spectre flexible "intake" duct along the underside plastic cover, will hold them in place with some mighty heavy duty cable tie wraps https://cimg7.ibsrv.net/gimg/www.fit...c02f54f035.jpg Almost, almost finished, as soon as the fog lamp covers arrive.... elkaku lookin good! where is that being routed to? to cool the brakes? to feed the intake? |
Originally Posted by evilchargerfan
(Post 1440058)
elkaku
lookin good! where is that being routed to? to cool the brakes? to feed the intake? |
https://cimg0.ibsrv.net/gimg/www.fit...aba1791af8.jpg
Hi guys! I lowered my GK5 with D2 springs and changed the wheels and tires from the stock 16"s. I'm going to change the tires I should've got a taller sidewall. |
Originally Posted by reclusebrown
(Post 1440235)
Hi guys! I lowered my GK5 with D2 springs and changed the wheels and tires from the stock 16"s. I'm going to change the tires I should've got a taller sidewall.
|
All times are GMT -4. The time now is 11:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands