When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Want to purchase a pre-loaded strut for a 2015 Fit
3rd Generation GK Specific Suspension & Brakes Sub-ForumThreads discussing suspension and brake related modifications for the 3rd generation Honda Fit (GK)
Want to purchase a pre-loaded strut for a 2015 Fit
Want to purchase a pre-loaded strut for a 2015 Fit
I need to replace the struts on my 2015 Fit. I can find lots of pre-loaded struts for the 2014 and earlier, but not the 2015. Can anyone suggest where I can buy pre-loaded struts for the 2015? Yes, I know I can rent spring compressors and do it that way, I would just rather not do that.
Thanks
The fronts were rather simple too. Only 1 bolt on the top, I'm used to seeing 3 up there. No complaints here, less bolts means less work!
for those who do not have a spring compressor ... we were able to pull off the disassemble of the passenger just fine w/o the need for spring compressors. sketchy .... but .... it came out just fine!
in a few weeks, will come back in this area to install camber bolts and a front sway bar. as a huge bonus, camber bolts from my old wrx just so happen to fit on this car ... yay!
(NOTE: used spring compressor on drivers side. did not bother using it on the passenger side, as there was virtually no tension)
Interesting. I thought the springs were always under compression. And can I get the new struts and springs installed without compressors? It looks like you are using springs that are a lot shorter than OEM.
