Torque Specs Reference etc?
Thread Starter
|
Member
Joined: Mar 2020
Posts: 320
From: Canada
Torque Specs Reference etc?
Does anyone have a copy of the shop manual or something of the sort for the GK? I'm trying to find torque specs for the subframe, rear swing arm for rigid collars, and the torque mount/lower engine mount specs for a Hasport mount.
I keep seeing photos of diagrams with torque specs for other Hondas (like here: https://www.civicx.com/forum/attachments/upload_2020-2-4_23-34-32-png.197693/ )but not for the GK. I don't see anything except the manual in the KISS thread. I think this might have helped but I see a black picture with arrows ( http://www.hfitinfo.com/hofi-609.html ).
Anyone know where to find a GK repair manual?
I keep seeing photos of diagrams with torque specs for other Hondas (like here: https://www.civicx.com/forum/attachments/upload_2020-2-4_23-34-32-png.197693/ )but not for the GK. I don't see anything except the manual in the KISS thread. I think this might have helped but I see a black picture with arrows ( http://www.hfitinfo.com/hofi-609.html ).
Anyone know where to find a GK repair manual?
Thread Starter
|
Member
Joined: Mar 2020
Posts: 320
From: Canada
Found the specs thanks to borrowing a Chilton Library pass. (I wish I could buy them in Canada 
...)
Rear Axle:
90164-SMG-E00 -> 93 Nm (x2)
Torque Mount:
90180-T9C-000 -> 93 Nm (x1 Vertical Bolt)
90188-TF0-000 -> 83 Nm (x1 Horizontal Bolt)
Subframe:
90179-SDA-A00 -> 103 Nm (x4)
(Front crossmember bolts -> 54Nm)
Hope this helps someone!
...)Rear Axle:
90164-SMG-E00 -> 93 Nm (x2)
Torque Mount:
90180-T9C-000 -> 93 Nm (x1 Vertical Bolt)
90188-TF0-000 -> 83 Nm (x1 Horizontal Bolt)
Subframe:
90179-SDA-A00 -> 103 Nm (x4)
(Front crossmember bolts -> 54Nm)
Hope this helps someone!
Thread
Thread Starter
Forum
Replies
Last Post
bill bosco
3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum
0
Jan 11, 2020 11:38 AM
xxryu139xx
3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum
0
Mar 13, 2015 07:35 PM