2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

Is it ok to wax as soon as my car arrives?

Thread Tools
 
Search this Thread
 
Old Sep 17, 2008 | 01:14 AM
  #1  
lmatthew9's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 83
From: Broken Arrow, OK
Is it ok to wax as soon as my car arrives?

Just wondering, I have herd that you are suppose to wait 6 months, to let the paint "settle". Anyone know anything about this?
 
Old Sep 17, 2008 | 01:22 AM
  #2  
KenBT's Avatar
Member
5 Year Member
Joined: Sep 2008
Posts: 129
From: San Pedro, CA
if you went to the dealer to get an oil change after a few months or so- trust me any decent dealer will automatically wash it...

if paint has problems after 6 months... you bought the wrong car
 
Old Sep 17, 2008 | 01:25 AM
  #3  
feared's Avatar
Member
iTrader: (12)
Joined: Apr 2007
Posts: 1,006
From: Pasadena, CA
5 Year Member
right wen i got my 08, as soon as i had time i clayed and waxed it
 
Old Sep 17, 2008 | 01:27 AM
  #4  
Goodguy-Fly's Avatar
Member
5 Year Member
Joined: Sep 2008
Posts: 333
From: Mankato, MN
Originally Posted by lmatthew9
Just wondering, I have herd that you are suppose to wait 6 months, to let the paint "settle". Anyone know anything about this?
I have always been told from the bodyshop to leave it alone for 90 days. Six months seems a little much.

Originally Posted by feared
right wen i got my 08, as soon as i had time i clayed and waxed it
Did it really require a clay bar right when you received it?
 
Old Sep 17, 2008 | 01:28 AM
  #5  
lmatthew9's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 83
From: Broken Arrow, OK
Originally Posted by KenBT
if you went to the dealer to get an oil change after a few months or so- trust me any decent dealer will automatically wash it...

if paint has problems after 6 months... you bought the wrong car
What I was trying to say was i know that you can wash it. I am saying i have herd that you are supppose to wait six months before you WAX it in order to let the paint settle. I have herd this on more than 1 occasion. Just checking its reliablity with people that seem to know a lot about cars.
 
Old Sep 17, 2008 | 01:29 AM
  #6  
KenBT's Avatar
Member
5 Year Member
Joined: Sep 2008
Posts: 129
From: San Pedro, CA
I know alot of people I deal with refuse to accept a dealer prepped car... they specifically request that they receive the car with all the plastic, protective covering on, etc- if it is cleaned- they will refuse delivery.

Since dealerships are well known to scratch cars, swirl marks, etc.

So the clients prefer to do it themselves

Any car make that says- hey don't wash the car for a month or so after delivery- is not a good car

if you have to worry about the paint- that is the least of the worries- what about the drivetrain, etc.
 
Old Sep 17, 2008 | 01:30 AM
  #7  
KenBT's Avatar
Member
5 Year Member
Joined: Sep 2008
Posts: 129
From: San Pedro, CA
bodyshop is one thing- that means had bodywork etc.

i think he was talking about receiving delivery of a new car
 
Old Sep 17, 2008 | 01:39 AM
  #8  
lmatthew9's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 83
From: Broken Arrow, OK
Originally Posted by KenBT
bodyshop is one thing- that means had bodywork etc.

i think he was talking about receiving delivery of a new car
I was talking about new car. Also, the dealership is not the people that said wait awhile. It is people that work on cars and some people that dont and it applies to ANY car i have herd. Not just this particular one, so I am not worried about the other things. I have had hondas before and know they are great cars. I was just wondering about the paint. Not just specifically the paint on the Fit either.
 
Old Sep 17, 2008 | 01:40 AM
  #9  
lmatthew9's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 83
From: Broken Arrow, OK
Originally Posted by Goodguy-Fly
I have always been told from the bodyshop to leave it alone for 90 days. Six months seems a little much.



Did it really require a clay bar right when you received it?
I have herd this before too. Because the cars generate such friction on the rail cars that tiny particles adhere in the paint. Just answering from what i have herd. I have no knowledge or experience with this.
 
Old Sep 17, 2008 | 02:05 AM
  #10  
lmatthew9's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 83
From: Broken Arrow, OK
Just read this:

A new car with a factory paint job can be waxed the moment it is rolled out of the manufacturing plant. Cars that have factory paint jobs are cured at much higher temperatures, sometimes as high as 300 degrees in special baking ovens. At a factory level, the car goes through the painting and baking process without any of the rubber, plastic, and cloth components installed. This is why they can expose the car and it's fresh paint to such high temperatures. These high temperatures and special paints used at the factory level insures the paint is fully cured by the time the car is completely assembled.
After-market paint finishes however, are cured at a much lower temperature to ensure the method of baking or heating the paint doesn't melt non-metal components such as wiring and vinyl. For this reason, it's best to follow the specific paint manufactures recommendations for care and maintenance of fresh paint. Most paint manufactures that supply paint to the refinish industry recommend that you allow anywhere from 30 to 90 days curing time after the paint is applied before you apply the first application of wax.
 
Old Sep 17, 2008 | 02:12 AM
  #11  
solbrothers's Avatar
Member
iTrader: (2)
Joined: Aug 2007
Posts: 7,343
From: Vallejo, Ca
5 Year Member
there isnt any reason to clay bar a new car
 
Old Sep 17, 2008 | 02:16 AM
  #12  
CBR2200's Avatar
Member
Joined: Apr 2008
Posts: 44
From: AZ
Yes you can, wash and wax away. Clay barring a brand new car is a complete waste of time.
 
Old Sep 17, 2008 | 06:10 AM
  #13  
Sz28r's Avatar
Member
Joined: Aug 2006
Posts: 139
From: Tampa, FL
5 Year Member
Originally Posted by CBR2200
Yes you can, wash and wax away. Clay barring a brand new car is a complete waste of time.
I agree - - I waxed our '09 the next day
 
Old Sep 17, 2008 | 07:35 AM
  #14  
badself's Avatar
Member
5 Year Member
Joined: Aug 2008
Posts: 364
From: baltimore, md
Originally Posted by solbrothers
there isnt any reason to clay bar a new car
Not unless the vehicle's train ride to your part of the world deposited rail dust on your brand new finish, rail dust that will soon oxidize and rust onto/into your paint.
 
Old Sep 17, 2008 | 08:26 AM
  #15  
BakedCookies's Avatar
Member
5 Year Member
iTrader: (16)
Joined: Aug 2008
Posts: 1,459
From: VA
Originally Posted by solbrothers
there isnt any reason to clay bar a new car
you must not know about the infamous rail dust then
 
Old Sep 17, 2008 | 08:33 AM
  #16  
Vilstar's Avatar
Member
5 Year Member
Joined: Feb 2006
Posts: 199
From: Irvine, Ca USA
Originally Posted by lmatthew9
Just wondering, I have herd that you are suppose to wait 6 months, to let the paint "settle". Anyone know anything about this?
You should wait about 90 days if it was just painted from a body shop. From a body shop is different than from the factory since they paint and then bake it on. It's generally a good idea if your car is parked outside to wax the top parts (the parts taking the most beatings from sun/weather) once a month (especially with the crumby paint on newer cars). Or you could just wax it once every three months and it should be fine.

But directly from the dealership you do not need to.
 
Old Sep 17, 2008 | 08:42 AM
  #17  
Silly Monkey's Avatar
Member
Joined: Aug 2008
Posts: 210
From: Royal Oak, MI
There's absolutely no problem waxing a new car with a factory finish. If you're lazy, like me, you might want to wait a few weeks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nexus4400
Fit DIY: Repair & Maintenance
58
Nov 13, 2017 01:44 PM
henryonfit
3rd Generation (2015+)
12
Jul 15, 2014 04:47 PM
Giggles
Fit DIY: Repair & Maintenance
21
Oct 18, 2008 11:32 AM
shazaam
Fit DIY: Repair & Maintenance
13
Jul 6, 2008 03:51 AM
bryanback
Fit DIY: Repair & Maintenance
17
Jun 9, 2008 08:08 AM




All times are GMT -4. The time now is 08:00 AM.