Finally got a chance to clean the Fit up
#1
Finally got a chance to clean the Fit up
Well, I didn't get a chance to snap any before pics, when you have 2 kids, time's a virtue. Anyway, here was the process:
Wash car with foam gun (CG CWG in the gun)
Clayed with some junk ass Megs clay
Optimum Poli Seal via PC with 4" green pad (speed 6)
Opti Seal (2 applications)
303 on tires
Prima Clarity on windows
Adams undercarriage on the wheel wells
Eagle one to clean tires and wheels
Duragloss Marine QD with some Aquawax mixed in on the wheels
It took me a little bit to get the hang of the Poli Seal as it disappears almost instantly but I made 2-3 passes which worked pretty good. On the other hand, the Opti Seal is the shiznit, stuff is great!
Wash car with foam gun (CG CWG in the gun)
Clayed with some junk ass Megs clay
Optimum Poli Seal via PC with 4" green pad (speed 6)
Opti Seal (2 applications)
303 on tires
Prima Clarity on windows
Adams undercarriage on the wheel wells
Eagle one to clean tires and wheels
Duragloss Marine QD with some Aquawax mixed in on the wheels
It took me a little bit to get the hang of the Poli Seal as it disappears almost instantly but I made 2-3 passes which worked pretty good. On the other hand, the Opti Seal is the shiznit, stuff is great!
Last edited by davela72; 05-17-2009 at 09:44 PM.
#3
A guy I work with did the cutting and another buddy of mine did the wiring....I drank beer and watched
Thread
Thread Starter
Forum
Replies
Last Post
phil@detailersdomain
Fit DIY: Repair & Maintenance
4
03-19-2009 08:20 AM