My TPMS light went on, but my code reader (Scanguage) doesn't detect any codes. Will only the honda scanner read those codes?
Thanks,
CP

 

i think you physically need the TPMS RF modules in order to 'clear' the codes.

during the winter my GE has TPMS come on due to snow tire set i have without the TPMS modules...and in the spring when i put the stockers back on the TPMS light goes away automatically.

 

I still have in front of me the bill, just 3 days ago, $137 bugs. Could be TPMS receiver or any of the 4 for sensor in your tires, mine was tire #3

DIAGNOSE CODE 35-1 tire 3 SENSOR LOW VOLTAGE

SOLVED "REPLACE SENSOR AND RELEARNED SYSTEM"

If you are a lucky boy check your TPMS fuse,if not, you already Know

 

i have a 2010 honda fit sport. while i was doing the paper work they were cleaning it and im assuming they put air in the tires without checking the psi. an hour after i was home the light came on "TPMS" this morning i went out there with a tire gauge and all the tires were well over 33 psi so i let some air out and drove it maybe 1/2 a mile and the light came off. The light will come on if too much air is in the tires