Fit DIY: Repair & Maintenance Threads discussing repairs and maintenance you can do yourself

sticker residue removal

Thread Tools
 
Search this Thread
 
Old Aug 7, 2006 | 11:14 PM
  #1  
JessW1982's Avatar
Thread Starter
|
Member
Joined: Jul 2006
Posts: 122
From: Philadelphia
sticker residue removal

Bah, I washed my Fit this weekend, and since it was hot, the decal that the dealer stuck on the back of my car was loose, so I (finally!) got the chance to pull it off. It left some of that sticky residue on the back of the hatch, though. I've been reading the threads about how to remove tree sap and bugs from the car's paint - would using some of those same methods remove this decal residue from my car? What would you recommend? Claybar? Goo Gone? Anyone used any of these products on the car in this situation with good results? I'll probably stop by the auto store this week, see what they have.

Thanks in advance.
 
Old Aug 8, 2006 | 12:15 AM
  #2  
Illusive's Avatar
Retired Moderator
iTrader: (4)
Joined: Apr 2006
Posts: 4,742
From: Calgary, AB, Canada
Goo Gone works well for this. Any kind of bug or tar remover will also work as well. I personally would use Goo Gone.
 
Old Aug 8, 2006 | 12:23 AM
  #3  
marokero's Avatar
Member
Joined: Jul 2006
Posts: 215
From: Long Island, NY
Goo Gone too.
 
Old Aug 8, 2006 | 07:57 AM
  #4  
Jonniedee's Avatar
Member
Joined: Sep 2005
Posts: 718
From: Plainwell Michigan
Exclamation Something you may already have...

Goo Gone is the bomb BUT...
Before you spend the $ on a bottle, try your old can of WD40 first
 
Old Aug 8, 2006 | 11:35 AM
  #5  
TheDanger's Avatar
Member
Joined: May 2006
Posts: 133
From: Jacksonville, FL
x4 I guess...I always use goo gone.
 
Old Aug 8, 2006 | 11:47 AM
  #6  
sLiVeRwOrM's Avatar
Four Wheels Enthusiast
5 Year Member
Joined: Apr 2006
Posts: 2,460
From: Austin TX, USA
Goo GONE!! W() ()T!! GOO GONE WILD!!
 
Old Aug 8, 2006 | 12:45 PM
  #7  
BenDF's Avatar
Member
Joined: Aug 2006
Posts: 93
From: Anaheim, CA
If it's on the window, a razor blade works well in conjunction with goo gone.
 
Old Aug 8, 2006 | 12:51 PM
  #8  
Illusive's Avatar
Retired Moderator
iTrader: (4)
Joined: Apr 2006
Posts: 4,742
From: Calgary, AB, Canada
Be careful with the razor blade even on the windows. I've seen people scratch the crap out of their windows because they are not patient. Take your time when you use a razor blade and make sure that you have a lot of water or goo gone on it to provide a thin film barrier to prevent scratching.
 
Old Aug 8, 2006 | 12:56 PM
  #9  
Packy's Avatar
Frequent FitFreak Poster
Joined: Apr 2006
Posts: 621
From: Portland, Oregon
Also, do not use anything abrasive to wipe when using goo-gone. We had old paint on a window at our house, and even using a cloth to scrub it afterwards caused some hazing and scratches.
 
Old Aug 8, 2006 | 12:58 PM
  #10  
BenDF's Avatar
Member
Joined: Aug 2006
Posts: 93
From: Anaheim, CA
That must be one sharp razor, or the guy must have been trying to stab his window lol. Yeah, just be careful, and cut at it as if you were shaving.
 
Old Aug 8, 2006 | 02:55 PM
  #11  
Rhyno's Avatar
Member
Joined: Apr 2006
Posts: 46
From: Massachusetts
Nail Polish remover sometimes works well.

I usually use stuff called Unisolve which is actually a product to remove residue from medical tape. I figure if its safe for my skin then its probably safe for my paint. =) But I have it lying around where as most people wouldn't. Try the nail polish remover...nice and cheap.
 
Old Aug 12, 2006 | 05:46 PM
  #12  
JessW1982's Avatar
Thread Starter
|
Member
Joined: Jul 2006
Posts: 122
From: Philadelphia
Thanks everyone for your replies! I ran out to the automotive store today and picked up some Goo Gone - worked like a charm! Next time I'll have to try the nail polish remover trick; if I had read the forums before I went out, it would have saved me a few bucks, lol.

Now, to get these dealer plates that they bolted to the bumper off, bah.
 
Old Aug 13, 2006 | 09:36 AM
  #13  
Wave's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2006
Posts: 1,093
From: Long Island, New York
WD40 works every time.
 
Old Apr 24, 2007 | 07:28 PM
  #14  
KnifeEdge_2K1's Avatar
Member
Joined: Aug 2006
Posts: 215
From: toronto
i use vegetable oil

just brush it on, wipe off the sides, let it soak for like 5-10 minutes and it should wipe right off
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jerome829
2nd Generation (GE 08-13)
7
Jul 18, 2014 12:03 PM
romnick_jazz07
Fit DIY: Repair & Maintenance
13
Jan 11, 2013 01:34 PM
Burbio
General Fit Talk
10
Nov 29, 2008 05:29 PM
webkris
Fit DIY: Repair & Maintenance
4
Jul 5, 2008 10:02 AM
tattoopunk031
Fit DIY: Repair & Maintenance
13
Feb 19, 2008 01:14 PM




All times are GMT -4. The time now is 01:17 PM.