Looking to install an inner fender liner on my FIT but not sure what kind of rivet to
#1
Looking to install an inner fender liner on my FIT but not sure what kind of rivet to
My passenger side inner fender liner is all torn up. I've patched it with duct tape but want to replace it. I got a replacement fender liner from partsgeek but it did not come with the rivets I need to install them.
My Fit is a 2008 if the helps. I'm thinking of buying these https://www.ebay.com/itm/100x-New-Bumper-Hood-Fender-Splash-Guard-Fastener-Retainer-Clips-for-Honda-Acura/253054722619?fits=Make%3AHonda%7CModel%3AFit&epid= 1438920388&hash=item3aeb3ca23b:gW0AAOSw2tRZccye& vxp=mtr#rwid
not sure if they will work.
My Fit is a 2008 if the helps. I'm thinking of buying these https://www.ebay.com/itm/100x-New-Bumper-Hood-Fender-Splash-Guard-Fastener-Retainer-Clips-for-Honda-Acura/253054722619?fits=Make%3AHonda%7CModel%3AFit&epid= 1438920388&hash=item3aeb3ca23b:gW0AAOSw2tRZccye& vxp=mtr#rwid
not sure if they will work.
#2
MIGHT work... worth a try.
Note that the OEM fasteners are different lengths depending on how many layers of plastic they capture. Might be a good idea to check OEM part numbers on an online dealer such as Bernardi...
Note that the OEM fasteners are different lengths depending on how many layers of plastic they capture. Might be a good idea to check OEM part numbers on an online dealer such as Bernardi...
Thread
Thread Starter
Forum
Replies
Last Post
proletariandan
Fit DIY: Repair & Maintenance
0
08-13-2009 12:15 PM