Simota Short Ram Intake
#2
I have installed a Simota Charger into my FIT and here are some pics on how I
installed it.
Stock intake:
now removed from engine bay:
now I removed this from the intake from the stock and put it into the new intake:
heres what it should look like now:
now install the new bracket to hold the new intake:
now install the air filter and DONE!! The end result
hope this helps
installed it.
Stock intake:
now removed from engine bay:
now I removed this from the intake from the stock and put it into the new intake:
heres what it should look like now:
now install the new bracket to hold the new intake:
now install the air filter and DONE!! The end result
hope this helps
#7
I don't have any numbers of gained hp but I do notice a quicker response on acceleration. I will try to have a video of what it sounds like. But if you don't mind a deep tone on acceleration you'll love this intake.
#9
Just letting everyone know, we see all simota products on our website. So no bidding on ebay hehe
We sell two different styles.
Simota USA - Simota Air filers, Simota Air intakes,Carbon fiber oil catch cans, oil filler caps
We sell two different styles.
Simota USA - Simota Air filers, Simota Air intakes,Carbon fiber oil catch cans, oil filler caps
#10
bro, mind if I ask anyone knows wat's the opening size of the air breather filter to install? coz I bought this Simota open pod from other ppl and the previous owner wanne keep the filter for himself.
#12
I see that the system is just a filter/CF pipe/angle? Also added the crankcase filter. Are there any other pipes/sensors that need readjusting? I have been thinking of making my own CF box, since I have a 3" K&N cone already. Just haven't explored taking out the entire stock system yet.
edit: ah, I see the MAF(?) connection on the angle tube now. Is that it?
edit: ah, I see the MAF(?) connection on the angle tube now. Is that it?
#13
I see that the system is just a filter/CF pipe/angle? Also added the crankcase filter. Are there any other pipes/sensors that need readjusting? I have been thinking of making my own CF box, since I have a 3" K&N cone already. Just haven't explored taking out the entire stock system yet.
edit: ah, I see the MAF(?) connection on the angle tube now. Is that it?
edit: ah, I see the MAF(?) connection on the angle tube now. Is that it?
Thread
Thread Starter
Forum
Replies
Last Post
Sid 6.7
Fit Engine Modifications, Motor Swaps, ECU Tuning
145
01-20-2017 08:34 PM
atvfit16
3rd Gen GK Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
14
03-12-2016 10:14 PM
Midnightfit
Fit Engine Modifications, Motor Swaps, ECU Tuning
16
01-30-2011 06:55 PM
Jimmy101
Fit Engine Modifications, Motor Swaps, ECU Tuning
29
02-28-2009 11:00 PM
Darkstars
Fit Engine Modifications, Motor Swaps, ECU Tuning
46
06-30-2008 08:22 AM