What XGauge will measure any difference in performance with a controvesial mod?
What XGauge will measure any difference in performance with a controvesial mod?
..........................................
Last edited by theloxmyth; Jan 23, 2009 at 12:14 AM.
just wanted to clarify, u have your scan gauge set to give you real time hp readout?? i have not ventured further than mpg and temperature readouts. i notice there is an ign, lod readout. is that the hp?
i know the gadget in question and i will keep my opinion to my self on that issue but as far as measuring the difference i would dyno the car numerous times to see if theres any differences --- say 2 times on a base run and then 2 times with the "gadget" to see if there any real differences
Displaying Horsepower as a Gauge
Displaying Horsepower as a Gauge
You can have Horsepower read out on your ScanGauge as you drive.
From:ScanGaugeII - Add-A-Gauge
You can have Horsepower read out on your ScanGauge as you drive.
From:ScanGaugeII - Add-A-Gauge
- To start, from the HOME screen use MORE>MORE>MORE>XGAUGE
- Then in the top right select the number of the XGauge memory you want to use (0 to 24)
- Next <EDIT this will take you to the TXD screen
- Using the buttons next to + and - after each character the -> in the top right will move to the next character space.
- Enter 00 into the TXD screen and press OK> You will be taken to RXF
- Enter 400080000000 and press OK> you will be take to RXD
- Enter 0000 and press OK> you will be taken to MTH (math)
- Enter 000A00170000 and press OK> you will be taken to NAME
- You can enter whatever name you would like up to 3 characters, when you are finished press OK>
- Lastly press SAVE.
thanks for the help 
now i have something else other than real time MPG readings to distract me while i drive lol
Thread
Thread Starter
Forum
Replies
Last Post
