what is wrong here?clutch/flywheel?!
#1
what is wrong here?clutch/flywheel?!
PICS ADDED!!!
well my clutch is goin out, so i ordered a spec stage 2 and a fidanza flywheel. the spec is straight from their plant, they had to make it for me, none in stock. and the flywheel from a reliable seller on fitfreak. but somethin aint addin up. the dont match up at all. the clutch is either too small or the flywheel is too big. i checked fidanza webpage and spec. both part numbers match up. can anyone help?
part number fidanza=191391
part number spec stage 2=sh412
but on the flywheel there is engraved= hy1-5737
i searched the code, but got nothin. im tryin to opst pics but cant get image shack to work right.ill try again tonight. this is really stressin me out!!!
clutch disk is way smaller than friction disk on flywheel.
pressure plate way smaller than flywheel.
pressure plate isnt big enoygh to reach mounts on flywheel
just dont FIT!!!
pat number for flywheel
part number for clutch
well my clutch is goin out, so i ordered a spec stage 2 and a fidanza flywheel. the spec is straight from their plant, they had to make it for me, none in stock. and the flywheel from a reliable seller on fitfreak. but somethin aint addin up. the dont match up at all. the clutch is either too small or the flywheel is too big. i checked fidanza webpage and spec. both part numbers match up. can anyone help?
part number fidanza=191391
part number spec stage 2=sh412
but on the flywheel there is engraved= hy1-5737
i searched the code, but got nothin. im tryin to opst pics but cant get image shack to work right.ill try again tonight. this is really stressin me out!!!
clutch disk is way smaller than friction disk on flywheel.
pressure plate way smaller than flywheel.
pressure plate isnt big enoygh to reach mounts on flywheel
just dont FIT!!!
pat number for flywheel
part number for clutch
Last edited by socalsmirff; 01-02-2010 at 08:27 PM.
#4
did you ever get around to getting your money back and maybe new flywheel w/ your spec clutch???
#5
nope, seller said all sales were final! so i gotta sell the flywheel( ebay/ craigs list) and i still got the spec clutch layin around for now. i bought the clutchmasters kit. gettin it installed this friday. its an uprade in size of clutch too, so the spec wont fit the clutch masters flywheel. gotta sell the spec, or keep it around, for replacement down the line on the stock flywheel.
#6
nope, seller said all sales were final! so i gotta sell the flywheel( ebay/ craigs list) and i still got the spec clutch layin around for now. i bought the clutchmasters kit. gettin it installed this friday. its an uprade in size of clutch too, so the spec wont fit the clutch masters flywheel. gotta sell the spec, or keep it around, for replacement down the line on the stock flywheel.
so whose fault was that ?
seller or buyer ?
#8
internet forums = NON REPUTABLE for EVERYTHING
#10
I have this flywheel and the exedy stage 1 and noticed the same issue thanks to this thread. Thankfully I haven't tried to install it yet! Will update after I talk to Fidanza after this weekend.
#11
So it looks like I ended up with an S2000 flywheel. Serial number on the flywheel is H9.6357. Sucks because I bought mine used, new in box and now I think ill have to resell it to get my money back.
Thread
Thread Starter
Forum
Replies
Last Post
BlueCell
Fit Engine Modifications, Motor Swaps, ECU Tuning
34
10-27-2017 07:51 PM
jsnatchdiggity
Fit Photos & Videos
31
08-02-2008 03:15 PM