Unofficial Honda FIT Forums

Fit Engine Modifications, Motor Swaps, ECU Tuning Reference Library for Engine Modifications, Swaps and Tuning

How to onvert to DBC for swap?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-16-2015, 08:37 PM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
How to onvert to DBC for swap?
I've seen a handful of k20 Fits that have traditional cable throttles and I was wondering how that was being done.
 
Reply
  #2  
Old 03-17-2015, 10:40 PM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
I think I found the answer. Ordered an RSX peddle on the bay.
 
Reply
  #3  
Old 03-24-2015, 11:59 PM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
Bump, these are the two throttle pedals, I could make this work, but I'm hoping there is an easier way.

 
Reply
  #4  
Old 04-01-2015, 11:26 PM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
 
Reply
  #5  
Old 04-03-2015, 02:25 AM
kylerwho's Avatar
spoon fed
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: Seabattle, Washington
Posts: 5,234
Felix69 used an ep3 throttle pedal.
 
Reply
  #6  
Old 04-03-2015, 02:52 PM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
Thanks. Looks to be the same as the RSX one that I got. Have to chop it up and make it fit.
 
Reply
  #7  
Old 04-04-2015, 12:26 PM
kylerwho's Avatar
spoon fed
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: Seabattle, Washington
Posts: 5,234
No need to chop it up. Just make a plate using the stock pedal as a template to bolt to the chassis. The drill and tap into that plate to screw in the rsx throttle plate.
 
Reply
  #8  
Old 04-04-2015, 04:06 PM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
The arm has a little different angle, it is only about an inch off the floor now. I want to cut the RSX one so it sits exactly like the Fit pedal.
 
Reply
  #9  
Old 06-03-2015, 01:33 AM
PinkBatman's Avatar
Member
Thread Starter
Join Date: Mar 2015
Location: MT
Posts: 52
Bump please!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DIY: ACUITY Instruments Throttle Pedal Spacer Installation
nisco
3rd Gen GK Specific Fit Interior Modifications Sub-Forum
2
11-30-2017 04:40 PM
Acuity Instruments Accelerator Pedal Relocation Bracket
USDM
3rd Generation (2015+)
5
10-14-2017 05:40 PM
Throttle position readings...
SprintexUSA
2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
9
04-08-2014 09:33 PM
FreePower Throttle Controller
'12Fit
2nd Generation (GE 08-13)
61
08-06-2012 04:57 PM
Long-leggers rejoice - Easy, cheap mod for extra legroom.
Occam
2nd Generation (GE 08-13)
2
11-26-2009 03:28 PM
Back to Subforum
Fit Engine Modifications, Motor Swaps, ECU Tuning
View Next Unread
2009 fit




Advanced Search
Quick Reply: How to onvert to DBC for swap?


Reply Closed Thread Share

All times are GMT -4. The time now is 12:13 PM.