Okay...

I've seen a few threads about people who have installed the Spoon spoiler. I noticed some people say they need to modify their rear wiper and some people didn't. Also, after installing the spoiler on a Sport, are their any holes remaining? Is it difficult to install the spoiler? Drilling holes involved?

Thanks for all the info.

 

Spoon spolier uses different holes than the factory spolier, u will need to drill 3 new holes for the install

 

i cut out the middle bolt so to not miscalculate when drilling. I used double tape over the stock spoiler holes. I had to cut my wiper but AJR told me that the new stock comes with a shorter wiper.

You do have to get the short radio antenna.

 

I cut my wiper too and just curled the stock antenna so its out of the way, I put up pics if you search around a bit.

 

any pictures of your cut wipers? also, you're saying that the newer Fits have shorter wipers? Mine was made 01/07. I hope I have the shorter wiper but I don't have anyone to compare with.

 

Actually for all the new Spoon roof spoiler comes with a shorter wiper so you will not need to do any modifications to your stock one so basically you just replace it when you install the wing.

 

Wow, thanks a lot for the info. No one else here has ever mentioned this... well, I didn't see it anywhere.

 

mmmmm Spoon shorter wiper

 

has anyone had a problem with minor leakage?? i just realised after i washed my car that there was a small leak comin down from the 3rd brake light.. not good, any suggestions??

 

I get that with my STOCK spoiler