Fit Interior & Exterior Illumination Threads discussing interior and exterior lighting modifications for the Fit/Jazz

Where to order tail light cover?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-31-2010, 04:23 PM
Killgore9998's Avatar
New Member
Thread Starter
Join Date: Aug 2010
Location: Silver Spring
Posts: 5
Where to order tail light cover?

Hi folks,

I'm a complete newbie when it comes to car issues, so I'm sorry if this question is stupid.

I recently cracked and broke off the cover of one of my tail lights on my 2009 Fit Sport. I understand that replacing the cover should be easy to DIY, but I don't know where to order a replacement cover.

So far all I've been able to find are entire tailight replacement modules. I don't need all that, however, as the bulb works fine, etc. I just need to replace the cover.

Any recommendations?

Thank you in advance!
 
  #2  
Old 08-31-2010, 04:34 PM
Goobers's Avatar
Member
5 Year Member
Join Date: Oct 2009
Location: Wandering around.
Posts: 4,295
I don't think the tail lights are sold like that.

As far as I know, they're sold as whole housings.

The "easy to DIY" usually refers to opening up an existing housing to smoke (darken) it, then put it back together.
 
  #3  
Old 08-31-2010, 04:39 PM
Killgore9998's Avatar
New Member
Thread Starter
Join Date: Aug 2010
Location: Silver Spring
Posts: 5
I see.

I guess that replacing the entire tail light would not be so easy to DIY?

I guess I should probably just take it to a body shop then.
 
  #4  
Old 08-31-2010, 04:49 PM
Btrthnezr3's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: May 2009
Location: Texas
Posts: 3,266
Replacing the tail light is EASY. It's like pop a panel on the inside, 3 bolts, 3 clips and bam, it's out...then reverse.

Please don't take it to a body shop just to replace the tail light...they will RAPE you.

Buy one off ebay--or if it's cheaper, buy a set of aftermarket tails...it is soooooo easy to change. 30 minutes...tops for both sides.
 
  #5  
Old 08-31-2010, 04:54 PM
Killgore9998's Avatar
New Member
Thread Starter
Join Date: Aug 2010
Location: Silver Spring
Posts: 5
Awesome. Thank you so much for your help, sir. Hopefully I don't screw up and buy the wrong one. =P
 
  #6  
Old 08-31-2010, 05:03 PM
Goobers's Avatar
Member
5 Year Member
Join Date: Oct 2009
Location: Wandering around.
Posts: 4,295
Originally Posted by Killgore9998
Awesome. Thank you so much for your help, sir. Hopefully I don't screw up and buy the wrong one. =P
Sorry, I didn't mean to imply it was hard, I only meant that any DIYs you might've found about opening up the housings for just for that, opening the housings (not replacing individual parts).

Swapping out the tail light for a new housing is an easy DIY too, just like Btrthnezr3 said.

The part number for the standard tail lights are:

33500-TK6-A01 (right side)
33550-TK6-A01 (left side)

So hopefully, if they claim to be OEs on ebay, they'll list part #s.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Myorangefit
Fit DIY: Repair & Maintenance
4
01-03-2021 02:59 AM
ONEDVSMOFO
2nd Generation (GE 08-13)
1
08-31-2012 01:49 AM
Killgore9998
General Fit Talk
7
09-02-2010 03:41 AM
dave clark
1st Generation (GD 01-08)
3
11-05-2008 08:36 PM
dave clark
2nd Generation (GE 08-13)
2
10-30-2008 11:18 AM



Quick Reply: Where to order tail light cover?



All times are GMT -4. The time now is 12:48 PM.