Fit Interior Modifications Discussion area for interior modifications including seats, steering wheels, upholstery and gauges

Installed Alpine 9884 with Metra kit cannot see the display while driving?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-02-2008, 08:36 PM
jvm051's Avatar
Member
Thread Starter
Join Date: Jul 2008
Location: Maricopa, Arizona
Posts: 160
Installed Alpine 9884 with Metra kit cannot see the display while driving?

Finally finished my system today, and was driving around enjoying some tunes, but the way the Metra kit holds the Head unit, the LCD is too dim to see. I maxed out the brightness, and still does not make a difference. Is the Schosche kit any better? Please help.
NOTE: The unit was off at the time of the picture. Just wanted everyone to see how far it sits back in the mount, and at the angle it is at.
 
  #2  
Old 08-03-2008, 12:37 AM
Rod2Rice's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: NY
Posts: 907
I think its just the way these kits angle the radio upwards. At times it was harder to see than others with my Alpine too, but never was unreadable. Here is what it will look like in a Scosche kit if it helps you at all.

Name:  IMG_0632.jpg
Views: 147
Size:  110.2 KB
 
  #3  
Old 08-03-2008, 01:39 AM
gimme's Avatar
Administrator
5 Year Member
iTrader: (13)
Join Date: Jun 2006
Location: Phoenix
Posts: 4,253
the scoche kit looks factory, not sure what's going on with the metra kit
 
  #4  
Old 08-03-2008, 12:43 PM
jvm051's Avatar
Member
Thread Starter
Join Date: Jul 2008
Location: Maricopa, Arizona
Posts: 160
Thanks for the pic of the Scosche kit. I guess I will swap it. Kinda sucks that Metra did not actually test this on a few different head units before producing them. It is also a pain in the ass to open the faceplate to insert a CD.
 
  #5  
Old 08-03-2008, 12:54 PM
mrwilli1's Avatar
Member
iTrader: (2)
Join Date: Jun 2008
Location: San Jose, CA
Posts: 125
I installed my Sony DVD using the Metra kit. What a mistake that was! Total crap!! It just looked cheesy and totally aftermarket. Swapped it with the Scosche the next day. I was very pleased with the look although I admit the Metra kit fit the dash a bit better.
 
  #6  
Old 08-03-2008, 01:26 PM
jvm051's Avatar
Member
Thread Starter
Join Date: Jul 2008
Location: Maricopa, Arizona
Posts: 160
Originally Posted by mrwilli1
I installed my Sony DVD using the Metra kit. What a mistake that was! Total crap!! It just looked cheesy and totally aftermarket. Swapped it with the Scosche the next day. I was very pleased with the look although I admit the Metra kit fit the dash a bit better.
Where did you get the kit from? Price?
 
  #7  
Old 08-03-2008, 02:04 PM
mrwilli1's Avatar
Member
iTrader: (2)
Join Date: Jun 2008
Location: San Jose, CA
Posts: 125
BUY.COM... $66 delivered.
 
  #8  
Old 08-03-2008, 11:31 PM
Rod2Rice's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: NY
Posts: 907
You can get the Scosche kit and wiring harness on ebay for like 50 bux or so, thats where I got mine. I had the Metra at first also, sent that garbage back ASAP as the fit for single DIN radios is horrible. With the 9884 you will probably want to use the trim ring from Alpine with the Schosche, I think it looks a lot better than the one with the kit.
 
  #9  
Old 08-03-2008, 11:46 PM
jvm051's Avatar
Member
Thread Starter
Join Date: Jul 2008
Location: Maricopa, Arizona
Posts: 160
Yeah im gonna order it this week. The wife drives the car a few days a week when we carpool, and the display is so bad, you have to lean over the steering wheel just to sort of see it. I think it is a safety hazzard, and Metra should be ashamed of putting something out on the market like this. Im going to complain to Crutchfield and see what happens.
 
  #10  
Old 08-03-2008, 11:57 PM
REXXXXXXXXX's Avatar
Frequent FitFreak Poster
Join Date: Sep 2007
Location: N Jersey
Posts: 805
I love my Metra kit! u guys are nuts! Looks totally stock, except for the touchscreen and all lol....
Name:  0603081524.jpg
Views: 102
Size:  37.2 KB
 
  #11  
Old 08-04-2008, 12:00 AM
mrwilli1's Avatar
Member
iTrader: (2)
Join Date: Jun 2008
Location: San Jose, CA
Posts: 125
Looks totally stock except for that ugly gap in the nose gasket at the top of the head unit. That's one of the reasons I went with the Scosche kit but, to each his own...
 
  #12  
Old 08-04-2008, 12:06 AM
REXXXXXXXXX's Avatar
Frequent FitFreak Poster
Join Date: Sep 2007
Location: N Jersey
Posts: 805
Originally Posted by mrwilli1
Looks totally stock except for that ugly gap in the nose gasket at the top of the head unit. That's one of the reasons I went with the Scosche kit but, to each his own...
its just the pic, trust me. the gap is smaller than my fingernail. u just gotta know how to install it... i bought all new retainer clips, and it fit nice and snug.
And on top of that, the metra kit is FREE when you order a head unit from crutchfield.com...
 
  #13  
Old 08-04-2008, 12:15 AM
jvm051's Avatar
Member
Thread Starter
Join Date: Jul 2008
Location: Maricopa, Arizona
Posts: 160
Originally Posted by REXXXXXXXXX
its just the pic, trust me. the gap is smaller than my fingernail. u just gotta know how to install it... i bought all new retainer clips, and it fit nice and snug.
And on top of that, the metra kit is FREE when you order a head unit from crutchfield.com...

For a Double Din player I'm sure it is fine, but single din, it sits too far back. And it is not free from crutchfield, it is $24.99. That is where I got mine from. But It is not worth .05 cents, if you can't see the display
 
  #14  
Old 08-04-2008, 10:33 AM
Rod2Rice's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: NY
Posts: 907
To me the Metra one almost looks TOO flat.
 
  #15  
Old 08-19-2008, 01:18 PM
Funchy's Avatar
New Member
Join Date: Aug 2008
Location: Maryland
Posts: 22
Originally Posted by REXXXXXXXXX
I love my Metra kit! u guys are nuts! Looks totally stock, except for the touchscreen and all lol....
Love the look!

What is the touchscreen? brand/model? I want one.
 
  #16  
Old 08-19-2008, 09:09 PM
Injundon's Avatar
Member
Join Date: Feb 2007
Location: Montreal' Canada
Posts: 779
It's not the dash kit, it's Alpine. the polish their faceplates too much. Kenwood and Pioneer are actually "hazy" to prevent such bad reflectivity. there's not too much can be done since the head unit is mounted pretty high in the dash on Fits as well as most newer vehicles.
 
  #17  
Old 08-24-2008, 08:21 PM
abcsr2ez4me's Avatar
Member
5 Year Member
Join Date: Sep 2006
Location: OR
Posts: 349
Originally Posted by jvm051
Thanks for the pic of the Scosche kit. I guess I will swap it. Kinda sucks that Metra did not actually test this on a few different head units before producing them. It is also a pain in the ass to open the faceplate to insert a CD.
Why is it a pain in the ass? I love the look of a recessed cd player like yours. Does it being recessed interfere with the motorized face?
 
  #18  
Old 08-24-2008, 11:45 PM
Rod2Rice's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: NY
Posts: 907
Yes the face hits with the Metra kit, only way to make it not hit is to not use the trim around it, but then it looks bad.
 
  #19  
Old 08-24-2008, 11:53 PM
kelsodeez's Avatar
UNBANABLE
5 Year Member
iTrader: (10)
Join Date: Jul 2007
Location: Af-BAN-istan
Posts: 4,548
yea u guys are nuts. i love my metra kit
 
  #20  
Old 08-25-2008, 12:10 AM
Rod2Rice's Avatar
Member
5 Year Member
iTrader: (11)
Join Date: Apr 2008
Location: NY
Posts: 907
It looks great with a DD, single looks like crapola.
 


Quick Reply: Installed Alpine 9884 with Metra kit cannot see the display while driving?



All times are GMT -4. The time now is 06:51 AM.