Can anyone help me access the 20 pin Radio connector on a 2004 Jazz please? I have removed the panel below the heater controls, removed the 2 bolts holding the centre panel in place, and released the 3 clips on the passenger side by prising at the right spot from inside the glovebox. There are 5 or 6 more clips to release which are very tight. As I want to re-fit the stock radio I don't want to damage the dash or centre panel but the remaining clips seem to need more brute force than I want to use! Anyone know of a non damaging way of releasing the remaining clips on the top and drivers' side to release the radio panel? Thanks, Ian

 

https://www.fitfreak.net/forums/fit-interior-modifications/2525-facia-panels.html

 

Thanks for your quick reply! I had already read that thread and the useful diagrams which helped me to get as far as I have. Unfortunately I can't read Japanese and I was hoping that someone may just know where to "prise" to release the last half dozen stubborn clips without damaging the dash or the centre panel. Thanks again, Ian

 

Need to use a fair amount of force. Just prise where all the clips are and it will come out. If you don't have the nerve for it like myself them get a professional car audio place to do it. If they scratch or break something then they have to replace it (cheap insurance).