Ok guys, I'm trying to find some shift extension here in Japan but I can't seem to find the one with Honda's threas pitch of 10x1.5 (weird hmmm).

I came across this:
http://global.rakuten.com/en/store/desir-de-vivre/item/hoshihikari-exea-et28/

and:
http://global.rakuten.com/en/store/mach7/item/gc85_doukei/

The problem is the thread pitch. (12x1.25 , 10x1.25 , 12x1.75). I really want to try those extensions.

Question is, what adapters should I buy for it to fit on Honda's 10x1.5 ? Sorry I don't know so much about thread pitch adapters.

Thank you.

 

Try Circuit Hero for a shift extension for Hondas:
CIRCUIT HERO - Rare Goods for Competition Spirits | PRODUCTS

 

^ I have and can vouch for there's. Your other choice is just to took on Ebay for one with the right pitch...

 

They don't have those on the shelf at Super Autobacs? Or no stores close to you?

They carried the Seiko extenders here in the US when they were open.

 

@gawa: those are nice extensions.. but I really want to try the bent one. xD thanks for suggesting.

@tpc: did that, no results >_<

@wanderer: I already went to 3 autobacs shop here, there is no 10x1.5 thread pitch >_<

I e- mailed the online shop of Autobacs, they told me they dont have the one for Hondas... I asked why, they didnt reply omg...

thanks guys!

 

Ohhhhhh... I actually have this bent one, but the finish could be better on it:

4" Bent NEO Chrome Titanium Shifter Shift Knob Extender Honda Acura M10X1 5 1 5 | eBay

 

Gawa's link is probably your best bet then, I haven't seen many angled extensions for Hondas except for the Garage Defend one.

Now that you mention it swiftmove I don't remember seeing any Seiko extensions at Autobacs for 10x1.5, I was shopping for a Toyota . I wonder why that is... maybe they don't make them because I don't see them online in Honda pitch either

 

Ebay has them for 8-14 bucks depending on if you want 1.5 through 4 inch extension

Im getting a 3 inch pretty soon here, long enough so that I can heat the bitch up and bend it towards me

 

i didnt like the shifter extender in the fit. the shifter feels crappy enough as it is.

 

Those are some good extensions! Now my problem would be the shipping payment that would be more expensive than the extension itself. >_<

 

I will try make my own xD

 

they are like $8 on ebay

 

http://www.ebay.com/itm/POLISHED-SHIFT-KNOB-EXTENSION-FOR-MANUAL-GEAR-SHIFTER-LEVER-75MM-EXTENDED-3-/200911117827?pt=Motors_Car_Truck_Parts_Accessories&hash=item2ec73c5e03&vxp=mtr
$6 on ebay

 

The only thign that worries me about the cheaper ones is the thread tolerances.

a loose thread tolerance means it will eventually loosen up.

Nothing a $1-$2 tube of threadlock cant fix!

 

lol feels great! xD
Now I can sit more comfortably with seat my seat all the way back <3

 

I have one, you can tighten it down pretty well. I was concerned about this too. Definitely wasn't perfect with some shavings on the inside but I just blew them out. Top thread is fine.

Nice work! Make some more and sell them haha

 

Thanks! I'm building a lower one right now.. I'll which one feels better xD