84's GD3 | Snail build
Yea, it aligns up perfectly with the stock holes.
Installed a 51R battery yesterday since my old one was weak.
The new start up on this is awesome! For those who are considering replacing their old battery, get the 51R! You just have to remove your old plastic mount and the new battery drops right in. Perfect fit!
Replaced my brake light switch yesterday since my 3rd brake light was flickering. I also replaced my two parking lights since they burnt out.
Gotta drop my car off later this week to get an o2 sensor checked out as my engine light is on.
Gotta drop my car off later this week to get an o2 sensor checked out as my engine light is on.
Dropped off my car today at Honda to get the engine check light checked out and it turned out to be a missing fuse.
The engine light error said that it was the air and fuel ratio sensor and the evap system. Once the fuse was replaced, the engine check light went away.
I had a weird suspicion that it was a fuse since I replaced my brake light switch the other week and was checking up on the fuses. I probably just missed putting one back or something. Oh well. Glad to have my car back 100%!
The engine light error said that it was the air and fuel ratio sensor and the evap system. Once the fuse was replaced, the engine check light went away.
I had a weird suspicion that it was a fuse since I replaced my brake light switch the other week and was checking up on the fuses. I probably just missed putting one back or something. Oh well. Glad to have my car back 100%!
We were. :P
Generally, anytime I go to a car show, I'm usually the only Fit as well.
Man! I usually put it where you used to keep it, near the ebrake lever. But due to the contour of the center console, the double sided tape usually wears out because of the dust and stuff being trapped under it.
The place where i have it now, since it's flat, holds it much better but then it's not really in sight. The struggle is real.
Generally, anytime I go to a car show, I'm usually the only Fit as well.
Man! I usually put it where you used to keep it, near the ebrake lever. But due to the contour of the center console, the double sided tape usually wears out because of the dust and stuff being trapped under it.
The place where i have it now, since it's flat, holds it much better but then it's not really in sight. The struggle is real.
We were. :P
Generally, anytime I go to a car show, I'm usually the only Fit as well.
Man! I usually put it where you used to keep it, near the ebrake lever. But due to the contour of the center console, the double sided tape usually wears out because of the dust and stuff being trapped under it.
The place where i have it now, since it's flat, holds it much better but then it's not really in sight. The struggle is real.
Generally, anytime I go to a car show, I'm usually the only Fit as well.
Man! I usually put it where you used to keep it, near the ebrake lever. But due to the contour of the center console, the double sided tape usually wears out because of the dust and stuff being trapped under it.
The place where i have it now, since it's flat, holds it much better but then it's not really in sight. The struggle is real.
The only other option (other than going stock or adding a STI lip) would be the J's Racing front lip.
Since I already have a bunch of ARC Magic parts, I went with that route. They're also more rare than the J's racing front lip. :P
If I had the JDM front end, I would go Modulo front lip. Having the USDM front is so limiting...
Since I already have a bunch of ARC Magic parts, I went with that route. They're also more rare than the J's racing front lip. :P
If I had the JDM front end, I would go Modulo front lip. Having the USDM front is so limiting...
The only other option (other than going stock or adding a STI lip) would be the J's Racing front lip.
Since I already have a bunch of ARC Magic parts, I went with that route. They're also more rare than the J's racing front lip. :P
If I had the JDM front end, I would go Modulo front lip. Having the USDM front is so limiting...
Since I already have a bunch of ARC Magic parts, I went with that route. They're also more rare than the J's racing front lip. :P
If I had the JDM front end, I would go Modulo front lip. Having the USDM front is so limiting...
top 1 motors has the full front splitter you can use from an ek9.
https://instagram.com/p/qr763VqMVR/?taken-by=peteyp_
If I ever got rid of my ARC winglets, I would def get the J's lip.
I still think the JDM front end conversion would be too much.
https://instagram.com/p/qr763VqMVR/?taken-by=peteyp_
I personally do not like Top1 since their splitters are a direct rip from ARC. Their full one piece is not bad but if I was going to pay that much, I could just make a custom one for cheaper.
.02
I still think the JDM front end conversion would be too much.
top 1 motors has the full front splitter you can use from an ek9.
https://instagram.com/p/qr763VqMVR/?taken-by=peteyp_
.02
