Camber Advice
#1
Camber Advice
Hey everyone,
I have a UK Spec 2007 Honda Jazz.
I'm looking to add a little bit of camber on all corners (lowered blah clearance blah). I've seen these 'EZ Shim Kits' which are dead cheap. My issue is that I came across some information saying these can cause issues on vehicles with rear disc brakes due to the camber only changing the alignment of the wheel, and not the caliper - causing a breaking issue as a result. The UK spec 1.4 comes with rear discs so this could be an issue..
Could anybody advise? I know the front is just a camber bolt job, and I know the rear takes shims; just need everything clarifying by someone with the know.
Thanks in advanced
Jack
I have a UK Spec 2007 Honda Jazz.
I'm looking to add a little bit of camber on all corners (lowered blah clearance blah). I've seen these 'EZ Shim Kits' which are dead cheap. My issue is that I came across some information saying these can cause issues on vehicles with rear disc brakes due to the camber only changing the alignment of the wheel, and not the caliper - causing a breaking issue as a result. The UK spec 1.4 comes with rear discs so this could be an issue..
Could anybody advise? I know the front is just a camber bolt job, and I know the rear takes shims; just need everything clarifying by someone with the know.
Thanks in advanced
Jack
Last edited by jackanyon; 11-09-2016 at 09:39 AM.
Thread
Thread Starter
Forum
Replies
Last Post