First off, this is my first post here I've been stalking around for awhile reading up and have found several good write ups (which is getting harder and harder to find). Anyway, my fiance has a silver 2008 fit base and we are starting the mod process. Seeing as I'm a mustang guy I'm asking for your educated opinion. We are looking at putting a set of motegi traklite 1.0's Or a set of the mr116's (linked below respectively) the main difference being the traklite is a 15x7 ?+35mm? and the mr116 is a 15x6.5 +40mm will either one of these have rubbing issues with a 205/50/15? as a side note either one will be powder coated white and the red bit on the mr116's will be painted pink to match her stripe she wants. Any input is welcomed and I thank anyone in advance as I said I am in new territory with a honda.

 

If its not lowered either will be fine. Of you plan to lower go with +40. +35 is flush on fit rear, and pokes a little in front.