The Official Blog from GD to GE to GK to GTI to R?
#1961
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
i dont usually use nav so been using the nuvi's battery-only setup the last few months. i got tired of waiting for satellites when i really need the nav on the fly... so decided to hardwire it today.
took the pcb out...
made the housing smaller and added spades for a quick tap.
finished! cant even see where the cord's coming out from inside the cubby.
took the pcb out...
made the housing smaller and added spades for a quick tap.
finished! cant even see where the cord's coming out from inside the cubby.
#1962
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
looks like my new CF sheet roll arrived. now i have enough packing tubes to make a Distroyer's turrent (3 cannons). lol
still deciding if i want to wrap the Z's roof or wrap my FitS's hood...
still deciding if i want to wrap the Z's roof or wrap my FitS's hood...
#1963
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
so i decided to wrap the Z's roof last night and it turned out nice, but it was like a roadster look than a CF look... and it reminded me of my pop's old's ninetyeight from back 1982 with the faux leather top option. so, decided to remove it this am. hahaha. it took me a good 3hrs to install it. oh well. i think im going to recycle this vinyl and wrap my Fit's hood with it. i think it's wide enough. hahaha.
#1964
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
here's the roof wrap i did a few days ago (but ended up removing per earlier post, didn't like the faux roadster canvas look):
after removing it, here's where it ended up... the wrap was too small so only did this as practice.
pretty impressive how forgiving this stuff is, huh?
after removing it, here's where it ended up... the wrap was too small so only did this as practice.
pretty impressive how forgiving this stuff is, huh?
Last edited by kenchan; 07-14-2010 at 09:53 AM.
#1967
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
im going to get a larger sheet to do the Fit's hood down the road AFTER i get everything fixed on it (passenger side fender, wheel bearing).
#1970
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
so tonight after motoring my FitS home, i think im going to give my thumb a rest from all the large area CF wrapping... from the heat gun and rubbing down the creases it's kinda needs a break. hahaha.
i think im going to make a template for my Z's rear wing.
i think im going to make a template for my Z's rear wing.
#1971
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
had to packup a few things for stuff i sold online yesterday at another car forum and ended up not having much time left for doing the template for the Z's wing. oh well.
one fellow was asking me for all sorts of personal info saying that he doesnt feel safe buying from me. wtf. i replied back how the hell do i know if you're a ledigimate buyer and not just phishing for my personal info??!! some people are just idiots at using the internet.
motored my FitS to work this am and it's a scorcher today... hot! but not hot like LA or arizona.
one fellow was asking me for all sorts of personal info saying that he doesnt feel safe buying from me. wtf. i replied back how the hell do i know if you're a ledigimate buyer and not just phishing for my personal info??!! some people are just idiots at using the internet.
motored my FitS to work this am and it's a scorcher today... hot! but not hot like LA or arizona.
#1972
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
cant wait to get home.... busy as hell day.
anyway, i think my box of low profile mini fuses arrived. had a couple burn out and hard to find them locally. they're like $15 for a batch of assortment 120pcs... yikes.
anyway, i think my box of low profile mini fuses arrived. had a couple burn out and hard to find them locally. they're like $15 for a batch of assortment 120pcs... yikes.
#1973
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
hope my new elephant toilet paper core arrives today (aka CF wrap).
didnt get a chance to do the template last night as i was chatting with the wife about kids stuff. i heard something about back to school stuff under $100 will get a 50% tax break in August?? anyone hear about this? it might be just our state... not sure.
wish they would do that for all sales tax so that i would be inclinded to buy more car stuff to stimulate the economy. Hahaha.
didnt get a chance to do the template last night as i was chatting with the wife about kids stuff. i heard something about back to school stuff under $100 will get a 50% tax break in August?? anyone hear about this? it might be just our state... not sure.
wish they would do that for all sales tax so that i would be inclinded to buy more car stuff to stimulate the economy. Hahaha.
#1974
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
btw, dont buy the cheapo low profile mini fuses from ebay. they are literally GARBAGE! out of 20 fuses i pulled gently on the contacts, 17 of them slipped out and fell apart (85% failure rate). at that failure out of 120pcs, only 18pcs would be 'functional.' hahaha.
those junk fuses can get stuck in the fuse box so becareful.
im going to check my other local autoparts store again.... most of them dont carry the mini low profiles for some reason though.
those junk fuses can get stuck in the fuse box so becareful.
im going to check my other local autoparts store again.... most of them dont carry the mini low profiles for some reason though.
#1975
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
gotz the low profile fuses locally at ORLY's. (O'reilly's)
and the ebay store refunded me the entire amount including the freight i paid after a quick email i wasn't happy with the fuses. dang, nice store. so i applied my refund to the new buss fuses and now im on my way.
and the elephant toilet paper core arrived as well.
and the ebay store refunded me the entire amount including the freight i paid after a quick email i wasn't happy with the fuses. dang, nice store. so i applied my refund to the new buss fuses and now im on my way.
and the elephant toilet paper core arrived as well.
#1976
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
my small emboss heatgun died today... lol i think i used it too much.
so i pulled out my regular large heatgun and did the work below.
pulled this wrap from the trash... lol
works just as good.
so i pulled out my regular large heatgun and did the work below.
pulled this wrap from the trash... lol
works just as good.
#1977
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
just a quick note on the wrap for engine cover...anyone thinking about doing the engine cover wrap should remember to remove the cover before driving because the wrap can not withstand the under-hood temps. just put it back on before your show.
didnt do too much FitS things over the weekend, but it was a workhorse going back and forth between errands.
motored the G on Sat, Z on Sun... was a hot weekend (and too short).
didnt do too much FitS things over the weekend, but it was a workhorse going back and forth between errands.
motored the G on Sat, Z on Sun... was a hot weekend (and too short).
#1978
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
cooler morning this am... means more power for the FitS. drive this am was actually pretty enjoyable. nothing like having throttle response when you need it.
#1979
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
was driving my FitS this am and was like dang, i have a painful blister or something on my left heel. i get to work and take a look and got a dark blue bruise... then remembered i mis-stepped in my music room last night while i was doing a firmware update on one of my equipment and landed my left foot on one of my heavy duty keyboard stool/throne.
so each shift was pretty painful... everytime i had to get out of gear i just slightly blipped the throttle to get into neutral
without using the clutch. that's one less painful clutch-in.
hope to recover before the weekend cause my G and Z have much heavier clutches...
so each shift was pretty painful... everytime i had to get out of gear i just slightly blipped the throttle to get into neutral
without using the clutch. that's one less painful clutch-in.
hope to recover before the weekend cause my G and Z have much heavier clutches...
Last edited by kenchan; 07-21-2010 at 01:59 PM.