General Fit Talk General Discussion on the Honda Fit/Jazz.

Honda Paint

Thread Tools
 
Search this Thread
 
Old Mar 6, 2008 | 12:51 AM
  #1  
minis2003's Avatar
Thread Starter
|
New Member
Joined: Feb 2008
Posts: 5
From: Fort Walton Beach, Fl
Honda Paint

Does anyone know where you can buy the clear 3M plastic bra for the Fit.
trying to prevent any rock from chipping the paint after i pick up my Fit from the Dealer next weekend
 
Old Mar 6, 2008 | 02:01 PM
  #2  
Mr.Ball's Avatar
Member
Joined: Feb 2008
Posts: 341
From: Clearwater,Florida
Overnightautoparts.com sell 3m clearshield's.They run for 99 dollar's for the Fit.
 
Old Mar 6, 2008 | 02:03 PM
  #3  
TOOL's Avatar
Retired Moderator
iTrader: (4)
Joined: Jun 2007
Posts: 9,487
From: San Ramon, CA
You can get that done anywhere windows are tinted. Most if not all Tint shops do the clear bra aswell.

Tyler
 
Old Mar 6, 2008 | 04:07 PM
  #4  
GAFIT's Avatar
Member
Joined: Feb 2008
Posts: 4,329
From: Cleveland, GA
5 Year Member
I looked at the one from Overnightautoparts. It's $99 for just the front bumper and then another $157 for the hood and mirrors...if I'm reading it right.

I found complete 3M kits on ebay for a lot less...

eBay Motors: 2007 2008 HONDA FIT GENUINE 3M CLEAR BRA (item 220091016467 end time Apr-03-08 16:38:42 PDT)

I'd really like to get one also...anyone try installing one themselves?
 
Old Mar 6, 2008 | 04:19 PM
  #5  
Mr.Ball's Avatar
Member
Joined: Feb 2008
Posts: 341
From: Clearwater,Florida
The only problem with the clear bra's for the hood of car's is I've heard from people that over time they will slightly discolor the hood a yellowish/white(maybe from the heat).On the other hand they seem safe for the bumper's.
 
Old Mar 6, 2008 | 04:22 PM
  #6  
GAFIT's Avatar
Member
Joined: Feb 2008
Posts: 4,329
From: Cleveland, GA
5 Year Member
Originally Posted by Mr.Ball
The only problem with the clear bra's for the hood of car's is I've heard from people that over time they will slightly discolor the hood a yellowish/white(maybe from the heat).On the other hand they seem safe for the bumper's.
Hmm...I hadn't heard that, but that would suck! My hood is chipping worse than my bumper. The rubber seems to absorb some of the impact and I'm sure that paint has flex agent while the hood just chips.
 
Old Mar 6, 2008 | 04:24 PM
  #7  
doctordoom's Avatar
Supervillain
iTrader: (7)
Joined: Sep 2006
Posts: 4,261
From: Los Angeles/Orange County
5 Year Member
I also think calling a tint shop would be a good idea since i've seen many that also install clearbras.

i've never heard of clearbras discoloring paint though. if anything, shouldn't they help prevent paint fade because they act as an additional filter of the sunlight before it reaches the paint?

edit: oh actually, do you mean the clearbra discolors into a yellowish white? then that makes a little more sense. but i've never heard of that either. plus i've had the clear 3m protectant on my headlights and foglights for about 1.5 years now and they look as clear to me now as they did when they were installed.
 

Last edited by doctordoom; Mar 6, 2008 at 04:27 PM.
Old Mar 6, 2008 | 04:40 PM
  #8  
07fitsport's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Jun 2007
Posts: 959
From: louisiana
ok if it is clear how do you know it has been applied
 
Old Mar 6, 2008 | 04:43 PM
  #9  
GAFIT's Avatar
Member
Joined: Feb 2008
Posts: 4,329
From: Cleveland, GA
5 Year Member
Originally Posted by 07fitsport
ok if it is clear how do you know it has been applied
Well...clearly you just look at it
 
Old Mar 6, 2008 | 04:51 PM
  #10  
Mr.Ball's Avatar
Member
Joined: Feb 2008
Posts: 341
From: Clearwater,Florida
If your hood is being beat up by alot of rock's,I would say go for it(I would).As for the discoloration,I think because the paint can't breath that well under the film,it fade's the paint over time and the sun beating on it will not help.The film itself is going to slightly yellow over time,but it's no big deal.I live in Florida,so I don't know what it does on car's that don't get direct sunlight(and 100% humidity) almost all the time.The leather bra's will discolor the paint underneath 100%,and that's why I couldn't find one through Mercede's for my CLK-500.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Press Fit
3rd Generation (2015+)
13
Jan 16, 2017 11:19 AM
tifosi360
Fit DIY: Repair & Maintenance
206
Mar 18, 2012 10:29 PM
blazej
2nd Generation (GE 08-13)
22
Sep 23, 2011 04:52 PM
BraytonAK
General Fit Talk
5
Jan 31, 2010 05:28 PM
Juliane
General Fit Talk
28
Sep 7, 2008 04:27 PM




All times are GMT -4. The time now is 01:03 AM.