General Fit Talk General Discussion on the Honda Fit/Jazz.

Trying to Help a Friend: No 12v Outlet?

Thread Tools
 
Search this Thread
 
Old Dec 11, 2009 | 02:20 PM
  #1  
Sean33's Avatar
Thread Starter
|
New Member
Joined: Dec 2009
Posts: 3
From: Chicago, IL
Trying to Help a Friend: No 12v Outlet?

Hi FitFreaks.

I'm trying to help a cluless friend with a 08 Fit and she tells me there is no 12v accessory outlet under the cap just a plastic filler.

Is this true, that some of these cars ship without accessory outlets?

Second are these outlets plug and play if you buy the harness or do you have to wire it all the back to the fuse box/engine bay. I've never looked at her car before.

I did a few searches but I couldn't find an exact answer other than everyone wants a 12V outlet in the rear.

Thanks for the help,

Sean
 
Old Dec 11, 2009 | 03:48 PM
  #2  
Uncle Gary's Avatar
Member
Joined: Apr 2009
Posts: 2,421
From: Upstate New York
5 Year Member
I can't speak for all Fits, but the outlet in mine works. I just went out to the garage and checked it. Of course, it's only "live" with the key in the "on" or "accessory" position.
 
Old Dec 11, 2009 | 04:03 PM
  #3  
Sean33's Avatar
Thread Starter
|
New Member
Joined: Dec 2009
Posts: 3
From: Chicago, IL
I don't think it's a matter of if it works. It sounds like the actual outlet is not in there. Its just a plastic tube instead of the outlet. That seemed very suprising to me.
 
Old Dec 11, 2009 | 04:40 PM
  #4  
TurboManGT's Avatar
Member
iTrader: (4)
Joined: Apr 2008
Posts: 1,421
From: Twin Cities
I have an 08 Sport and mine is functional
 
Old Dec 11, 2009 | 04:55 PM
  #5  
seeremlive's Avatar
Member
Joined: Apr 2008
Posts: 253
From: Parma Heights, OH, USA
There should be a metal outlet inside the plastic tube. If not then if you have a warranty take it in. Sounds like it got missed in assembly.

If it was a used car you will have to pull the center console and see if the wires are there. if they are, go to the dealer and get the part and install it. It just snaps in and then clips to the wire.

If the wire isn't there, well then you have to run a new wire to power and make sure it is fused (or install a fuse inline) but you still have to buy the socket from Honda to clip into the console holder.

To run one in back just tuck the wire under the carpet from front to back removing the sill plate at the door bottom. Cut a hole in the panel where you want it and install an outlet (with or without cover the auto parts stores carry both for under $15) and you are home free. Just make sure to connect the center of the outlet to + (positive) and the outside to - (negative).
 
Old Dec 11, 2009 | 05:08 PM
  #6  
TurboManGT's Avatar
Member
iTrader: (4)
Joined: Apr 2008
Posts: 1,421
From: Twin Cities
Does she have the JDM center console? You have to switch out the outlet when you do the install.
 
Old Dec 11, 2009 | 06:43 PM
  #7  
Sean33's Avatar
Thread Starter
|
New Member
Joined: Dec 2009
Posts: 3
From: Chicago, IL
Hey guys thanks for the help. She brought her car over and I realized she wasn't pushing in the her adapter far enough so she thought the 12v outlet wasn't working or wasn't there. jeesh, women.

Thanks,
Sean
 
Old Dec 11, 2009 | 06:53 PM
  #8  
Perrenoud Fit's Avatar
Member
iTrader: (2)
Joined: Dec 2008
Posts: 4,439
From: Chesapeake, VA. -USA
5 Year Member
jeesh

That'ns going to be high maintenice, good luck! sean
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Oneoldphlaytis
2nd Generation (GE 08-13)
12
Jan 12, 2016 11:28 PM
SilverEX15
3rd Generation (2015+)
1
Aug 13, 2014 06:52 PM
MarcoM
Fit Interior Modifications
4
Jan 5, 2011 08:23 PM
hogsniper
Fit DIY: Repair & Maintenance
9
Mar 13, 2008 06:22 PM
benlinus
General Fit Talk
4
Nov 21, 2007 12:36 AM




All times are GMT -4. The time now is 04:52 AM.