Vancouver General Chat
It took me no time at all because I had the bodyshop do it as I wanted it done properly!!! It's so smooth that you can't feel any lines between the colours!!
Actually, the plate is photoshopped onto the car. I do have real Mugen plates though 

Just that I don't want to open the package as these are quite rare and were never sold commercially!!!
Besides, these aren't the correct ones for the Fit. I'm still searching for the newer ones like this:


Just that I don't want to open the package as these are quite rare and were never sold commercially!!!
Besides, these aren't the correct ones for the Fit. I'm still searching for the newer ones like this:
Last edited by Mugen_Dom; Apr 29, 2008 at 01:25 AM.
Welcome.
Hm, I need some of y'all inputs. lol Should I get Rota C8 or Rota Torque? Looking at 16x7 and hoping they either offer +40 or +42 offset; Either in Bronze for hte C8's or Gunmetal, which ever one looks better right?

I saw another user on this forum have the c8 - 16x7 +40 and I'm starting to like it even more if these were on my car with bronze. grr

I saw another user on this forum have the c8 - 16x7 +40 and I'm starting to like it even more if these were on my car with bronze. grr
Last edited by ericman20; May 4, 2008 at 10:59 PM.
I just installed my T1R b-pipe and I think I may of screwed up. In the package, there's 5 bolts, 5 nuts and 2 gaskets. When I took off the part connecting to the b-pipe to the cat, I used the same bolts and NEW nuts. Is that okay? - When I connected my spoon n1 to the b-pipe, I use the old round gasket and two NEW bolts and two OLD nuts which were from the bp -> cat. Is that okay? There's a burning plastic smell, is that normal?
ANOTHER QUESTION: Is the b-pipe suppose to hang a little lower than usual? Because if I go down and sorta look, I can see it dropped down lower and not really tucked in closer to the heat shield. Help?
ANOTHER QUESTION: Is the b-pipe suppose to hang a little lower than usual? Because if I go down and sorta look, I can see it dropped down lower and not really tucked in closer to the heat shield. Help?
Last edited by ericman20; May 6, 2008 at 01:27 AM.
Hm, I need some of y'all inputs. lol Should I get Rota C8 or Rota Torque? Looking at 16x7 and hoping they either offer +40 or +42 offset; Either in Bronze for hte C8's or Gunmetal, which ever one looks better right?
I saw another user on this forum have the c8 - 16x7 +40 and I'm starting to like it even more if these were on my car with bronze. grr
I saw another user on this forum have the c8 - 16x7 +40 and I'm starting to like it even more if these were on my car with bronze. grr
Your exhaust hangers are probably bent. You'll have to put it onto a hoist and use a big pry bar to bent them back up.
Nice car wash tomorrow. I've just noticed that the Fits rear bumper loves to collect dust... it's freaking annoying
I sold it....I got as far as the first date and then couldn't be bothered with it anymore....
I dunno.....guess I'm just not into it anymore.....
I dunno.....guess I'm just not into it anymore.....







