Other Car Related Discussions Discuss all other cars here.

Door seal/gaps

Thread Tools
 
Search this Thread
 
  #1  
Old 05-04-2005, 04:44 PM
acctforjunk@yahoo.com
Guest
Posts: n/a
Door seal/gaps

I noticed on my 04 Accord coupe that the passenger side door doesn't
line up very well. The rubber seal at the very top, visible with the
door closed from the outside, doesn't make contact during the last 6
inches or so, starting from the rear of the door. Also, the tiny
horizontal ledge above the door handle (and right below the window) is
higher than the matching rear quarter panel. Also, the bottom on the
door is sunk in a little too far. The drivers door matches up
perfectly. Take a look at your 03-05 coupe, is yours like this?

 
  #2  
Old 05-04-2005, 04:44 PM
SoCalMike
Guest
Posts: n/a
Re: Door seal/gaps

acctforjunk@yahoo.com wrote:
> I noticed on my 04 Accord coupe that the passenger side door doesn't
> line up very well. The rubber seal at the very top, visible with the
> door closed from the outside, doesn't make contact during the last 6
> inches or so, starting from the rear of the door. Also, the tiny
> horizontal ledge above the door handle (and right below the window) is
> higher than the matching rear quarter panel. Also, the bottom on the
> door is sunk in a little too far. The drivers door matches up
> perfectly. Take a look at your 03-05 coupe, is yours like this?
>


hm. mighta been in an accident in transit? like whoever drove it up on
the truck, or down off it?
 
  #3  
Old 05-04-2005, 04:44 PM
acctforjunk@yahoo.com
Guest
Posts: n/a
Re: Door seal/gaps

The thing is, I don't remember it being like this during the 1st year
or so of ownership. Very strange. It looks like the door just needs
to be "twisted" back into alignment since the bottom is sunk in a
little too far. Also, I can find no signs of repair. It looks perfect
inside and out.

 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
plastidip
1st Generation (GD 01-08)
4
06-26-2017 01:51 PM
interestingstuff
2nd Generation (GE 08-13)
11
01-09-2011 10:51 PM
spin out
2nd Generation (GE 08-13)
7
01-24-2009 10:35 PM
jenhonski
2nd Generation (GE 08-13)
3
12-31-2008 09:28 PM
tanger
General Fit Talk
17
11-04-2008 11:57 PM



Quick Reply: Door seal/gaps



All times are GMT -4. The time now is 06:10 AM.