Cadence audio equipment
#1
Cadence audio equipment
I've decided im gonna go ahead and sell my sub, amp, and line driver. Ask anyone thats seen my previous setups, and they will tell you, I don't mess around with cheap audio shit.
That said:
I have a Cadence DCA-1000 (from their Daytona line). I've had this installed for about six months, gain has never been up over half, and has been all the way down since I got the line driver. Mono output is 1000rms @ 1-ohm, 750rms @ 2-ohm, and 25rms @ 4-ohm. Anyone else remember cheater amps lol?
I PAID $275
ASKING $175
I have a Cadence Triplex 12 (2-ohm single coil) rated for 600rms, 900 peak. Tipping the scales at over 35 pounds, this sub is quality. If you went to the WRTeam show last summer, I believe the orange car that was shaking the building (from outside) was running these. It's only ever been hooked up to the amp listed above, and has never given me any problems. I also have this sub installed in a ported box. If you want the box, the price is a little more.
I PAID $250 (330 with the box)
ASKING $150
W/BOX $200
Also, to clean up the input from the stock headunit (or any aftermarket), I have a Cadence QXR-1 Signal Processor. This acts as a crossover, and a line driver to provide the cleanest signal to the amp. Using this with any amp with built in crossover controls allows for shelving, or tune it for an extremely sharp cutout for precision control.
I PAID $100
ASKING $65
You will probably not find this kind of quality equipment on ebay. If you want a package price for a complete setup that will flex your trunk, lemme know. I will consider reasonable offers (read: no low balling). One more thing to note, all of this was purchased at Radio Lab on Paxton Street in Harrisburg.
I can ship at your expense; but be aware that audio equipment (except the bass controller) is very heavy. I'm located in central PA and willing to meet halfway.
That said:
I have a Cadence DCA-1000 (from their Daytona line). I've had this installed for about six months, gain has never been up over half, and has been all the way down since I got the line driver. Mono output is 1000rms @ 1-ohm, 750rms @ 2-ohm, and 25rms @ 4-ohm. Anyone else remember cheater amps lol?
I PAID $275
ASKING $175
I have a Cadence Triplex 12 (2-ohm single coil) rated for 600rms, 900 peak. Tipping the scales at over 35 pounds, this sub is quality. If you went to the WRTeam show last summer, I believe the orange car that was shaking the building (from outside) was running these. It's only ever been hooked up to the amp listed above, and has never given me any problems. I also have this sub installed in a ported box. If you want the box, the price is a little more.
I PAID $250 (330 with the box)
ASKING $150
W/BOX $200
Also, to clean up the input from the stock headunit (or any aftermarket), I have a Cadence QXR-1 Signal Processor. This acts as a crossover, and a line driver to provide the cleanest signal to the amp. Using this with any amp with built in crossover controls allows for shelving, or tune it for an extremely sharp cutout for precision control.
I PAID $100
ASKING $65
You will probably not find this kind of quality equipment on ebay. If you want a package price for a complete setup that will flex your trunk, lemme know. I will consider reasonable offers (read: no low balling). One more thing to note, all of this was purchased at Radio Lab on Paxton Street in Harrisburg.
I can ship at your expense; but be aware that audio equipment (except the bass controller) is very heavy. I'm located in central PA and willing to meet halfway.
#2
bump the thread ttt
#3
bumpd ttt again
Thread
Thread Starter
Forum
Replies
Last Post