1st Generation (GD 01-08) The one that started it all! Generation specific talk and questions here!

misfire & hesitation when acceleration

Thread Tools
 
Search this Thread
 
Old Jan 3, 2017 | 08:55 PM
  #1  
Hondarian's Avatar
Thread Starter
|
Member
Joined: Mar 2016
Posts: 32
From: Malaysia
misfire & hesitation when acceleration

I have problem after changing coil Plug & spark plug, I'm check on obd Scan, STFT & LTFT engine running rich, but o2 sensor determine my engine running lean, MAP, IAT, Coolant Sensor, TPS, vacuum leak is checked and in good condition, I suspect o2 sensor is bad/clogged because only show 0.1volt


Short term fuel trim bank 1 , long term fuel trim bank 1, long term fuel trim bank 2, intake tempreture,



O2 bank 1 sensor 1 show 0.1 v even intake is open
 
Attached Thumbnails misfire & hesitation when acceleration-1-80-screenshot_2017_01_02_15_07_51_483_org_prowl_torquefree_091d84312cfb3e657cb04a6440d7dd5437d.png   misfire & hesitation when acceleration-2-80-screenshot_2017_01_02_15_08_20_325_org_prowl_torquefree_5eac149d3f052f1bf86af7067e5cbf48cba.png  

Last edited by Hondarian; Jan 9, 2017 at 08:09 PM.
Old Jan 6, 2017 | 09:37 PM
  #2  
doctor J's Avatar
Member
Joined: Aug 2008
Posts: 1,600
From: Orange, CA, USA
5 Year Member
Did you use Honda parts from reputable source?
If so, check the new spark plugs for proper gaps and proper tightening.
Denso plugs have "hard to crush" sealing washer; semi-tightened plug may leak and cause misfires
 
Old Jan 9, 2017 | 08:08 PM
  #3  
Hondarian's Avatar
Thread Starter
|
Member
Joined: Mar 2016
Posts: 32
From: Malaysia
Im using 4 new hitachi coil, im disconnect all 4 coil connector when engine is idle, i feel a reduction in engine rpm, it happen after changing a coil
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
henryweston157
3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum
18
Apr 4, 2019 07:24 PM
benjhind
1st Generation (GD 01-08)
6
May 23, 2018 03:20 PM
Body2Big
1st Generation (GD 01-08)
3
Mar 5, 2016 11:54 PM
Jeff Pirkey
Fit DIY: Repair & Maintenance
1
Aug 13, 2011 12:14 AM
Santiad
2nd Generation (GE 08-13)
17
Jul 21, 2011 04:46 PM




All times are GMT -4. The time now is 09:37 AM.